lkml.org 
[lkml]   [2018]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.9 25/48] pinctrl: ssbi-gpio: Fix pm8xxx_pin_config_get() to be compliant
Date
From: Douglas Anderson <dianders@chromium.org>

[ Upstream commit b432414b996d32a1bd9afe2bd595bd5729c1477f ]

If you look at "pinconf-groups" in debugfs for ssbi-gpio you'll notice
it looks like nonsense.

The problem is fairly well described in commit 1cf86bc21257 ("pinctrl:
qcom: spmi-gpio: Fix pmic_gpio_config_get() to be compliant") and
commit 05e0c828955c ("pinctrl: msm: Fix msm_config_group_get() to be
compliant"), but it was pointed out that ssbi-gpio has the same
problem. Let's fix it there too.

Fixes: b4c45fe974bc ("pinctrl: qcom: ssbi: Family A gpio & mpp drivers")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c | 28 ++++++++++++++++++------
1 file changed, 21 insertions(+), 7 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
index d3f5501d17ee..e86c4de2f6db 100644
--- a/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
+++ b/drivers/pinctrl/qcom/pinctrl-ssbi-gpio.c
@@ -260,22 +260,32 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,

switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
- arg = pin->bias == PM8XXX_GPIO_BIAS_NP;
+ if (pin->bias != PM8XXX_GPIO_BIAS_NP)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
- arg = pin->bias == PM8XXX_GPIO_BIAS_PD;
+ if (pin->bias != PM8XXX_GPIO_BIAS_PD)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_BIAS_PULL_UP:
- arg = pin->bias <= PM8XXX_GPIO_BIAS_PU_1P5_30;
+ if (pin->bias > PM8XXX_GPIO_BIAS_PU_1P5_30)
+ return -EINVAL;
+ arg = 1;
break;
case PM8XXX_QCOM_PULL_UP_STRENGTH:
arg = pin->pull_up_strength;
break;
case PIN_CONFIG_BIAS_HIGH_IMPEDANCE:
- arg = pin->disable;
+ if (!pin->disable)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_INPUT_ENABLE:
- arg = pin->mode == PM8XXX_GPIO_MODE_INPUT;
+ if (pin->mode != PM8XXX_GPIO_MODE_INPUT)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_OUTPUT:
if (pin->mode & PM8XXX_GPIO_MODE_OUTPUT)
@@ -290,10 +300,14 @@ static int pm8xxx_pin_config_get(struct pinctrl_dev *pctldev,
arg = pin->output_strength;
break;
case PIN_CONFIG_DRIVE_PUSH_PULL:
- arg = !pin->open_drain;
+ if (pin->open_drain)
+ return -EINVAL;
+ arg = 1;
break;
case PIN_CONFIG_DRIVE_OPEN_DRAIN:
- arg = pin->open_drain;
+ if (!pin->open_drain)
+ return -EINVAL;
+ arg = 1;
break;
default:
return -EINVAL;
--
2.17.1
\
 
 \ /
  Last update: 2018-11-01 00:20    [W:1.136 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site