lkml.org 
[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 02/11] gpu: ipu-csi: Swap fields according to input/output field types
From
Date
Hi Philipp,


On 10/05/2018 02:44 AM, Philipp Zabel wrote:
> Hi Steve,
>
> On Thu, 2018-10-04 at 11:53 -0700, Steve Longerbeam wrote:
>
>
>> +
>> + /* framelines for NTSC / PAL */
>> + height = (std & V4L2_STD_525_60) ? 525 : 625;
> I think this is a bit convoluted. Instead of initializing std, then
> possibly changing it, and then comparing to the inital value, and then
> checking it again to determine the new height, why not just:
>
> if (width == 720 && height == 480) {
> std = V4L2_STD_NTSC;
> height = 525;
> } else if (width == 720 && height == 576) {
> std = V4L2_STD_PAL;
> height = 625;
> } else {
> dev_err(csi->ipu->dev,
> "Unsupported interlaced video mode\n");
> ret = -EINVAL;
> goto out_unlock;
> }
>
> ?

Yes that was a bit convoluted, fixed.

>
>>
>> /*
>> * if cycles is set, we need to handle this over multiple cycles as
>> * generic/bayer data
>> */
>> - if (is_parallel_bus(&priv->upstream_ep) && incc->cycles) {
>> - if_fmt.width *= incc->cycles;
> If the input format width passed to ipu_csi_init_interface is not
> multiplied by the number of cycles per pixel anymore, width in the
> CSI_SENS_FRM_SIZE register will be set to the unmultiplied value from
> infmt.
> This breaks 779680e2e793 ("media: imx: add support for RGB565_2X8 on
> parallel bus").

Oops, that was a mistake, thanks for catching, fixed.

Steve

\
 
 \ /
  Last update: 2018-10-09 00:00    [W:0.082 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site