lkml.org 
[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next V3] virtio_net: ethtool tx napi configuration
Date
Implement ethtool .set_coalesce (-C) and .get_coalesce (-c) handlers.
Interrupt moderation is currently not supported, so these accept and
display the default settings of 0 usec and 1 frame.

Toggle tx napi through setting tx-frames. So as to not interfere
with possible future interrupt moderation, value 1 means tx napi while
value 0 means not.

Only allow the switching when device is down for simplicity.

Link: https://patchwork.ozlabs.org/patch/948149/
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
---
Changes from V2:
- only allow the switching when device is done
- remove unnecessary global variable and initialization
Changes from V1:
- try to synchronize with datapath to allow changing mode when
interface is up.
- use tx-frames 0 as to disable tx napi while tx-frames 1 to enable tx napi
---
drivers/net/virtio_net.c | 50 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)

diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 765920905226..751f385f4e0a 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -2181,6 +2181,54 @@ static int virtnet_get_link_ksettings(struct net_device *dev,
return 0;
}

+static int virtnet_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct ethtool_coalesce ec_default = {
+ .cmd = ETHTOOL_SCOALESCE,
+ .rx_max_coalesced_frames = 1,
+ };
+ struct virtnet_info *vi = netdev_priv(dev);
+ int i, napi_weight;
+ bool running = netif_running(dev);
+
+ if (ec->tx_max_coalesced_frames > 1)
+ return -EINVAL;
+
+ ec_default.tx_max_coalesced_frames = ec->tx_max_coalesced_frames;
+ napi_weight = ec->tx_max_coalesced_frames ? NAPI_POLL_WEIGHT : 0;
+
+ /* disallow changes to fields not explicitly tested above */
+ if (memcmp(ec, &ec_default, sizeof(ec_default)))
+ return -EINVAL;
+
+ if (napi_weight ^ vi->sq[0].napi.weight) {
+ if (dev->flags & IFF_UP)
+ return -EBUSY;
+ for (i = 0; i < vi->max_queue_pairs; i++)
+ vi->sq[i].napi.weight = napi_weight;
+ }
+
+ return 0;
+}
+
+static int virtnet_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ec)
+{
+ struct ethtool_coalesce ec_default = {
+ .cmd = ETHTOOL_GCOALESCE,
+ .rx_max_coalesced_frames = 1,
+ };
+ struct virtnet_info *vi = netdev_priv(dev);
+
+ memcpy(ec, &ec_default, sizeof(ec_default));
+
+ if (vi->sq[0].napi.weight)
+ ec->tx_max_coalesced_frames = 1;
+
+ return 0;
+}
+
static void virtnet_init_settings(struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
@@ -2219,6 +2267,8 @@ static const struct ethtool_ops virtnet_ethtool_ops = {
.get_ts_info = ethtool_op_get_ts_info,
.get_link_ksettings = virtnet_get_link_ksettings,
.set_link_ksettings = virtnet_set_link_ksettings,
+ .set_coalesce = virtnet_set_coalesce,
+ .get_coalesce = virtnet_get_coalesce,
};

static void virtnet_freeze_down(struct virtio_device *vdev)
--
2.17.1
\
 
 \ /
  Last update: 2018-10-09 04:06    [W:0.045 / U:6.224 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site