lkml.org 
[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] iio: adc: ina2xx: fix missing break statement
Date
From: Colin Ian King <colin.king@canonical.com>

The IIO_CHAN_INFO_SCALE case is missing a break statement and in
the unlikely event that chan->address is not matched in the nested
switch statement then the code falls through to the following
IIO_CHAN_INFO_HARDWAREGAIN case. Fix this by adding the missing
break. While we are fixing this, it's probably a good idea to
add in a break statement to the IIO_CHAN_INFO_HARDWAREGAIN case
too (this is a moot point).

Detected by CoverityScan, CID#1462408 ("Missing break in switch")

Fixes: ca6a2d86acae ("iio: adc: ina2xx: Allow setting Shunt Voltage PGA gain and Bus Voltage range")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
---
drivers/iio/adc/ina2xx-adc.c | 2 ++
1 file changed, 2 insertions(+)

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index d1239624187d..9bc5986780b9 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -250,6 +250,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
*val2 = chip->shunt_resistor_uohm;
return IIO_VAL_FRACTIONAL;
}
+ break;

case IIO_CHAN_INFO_HARDWAREGAIN:
switch (chan->address) {
@@ -262,6 +263,7 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
*val = chip->range_vbus == 32 ? 1 : 2;
return IIO_VAL_INT;
}
+ break;
}

return -EINVAL;
--
2.17.1
\
 
 \ /
  Last update: 2018-10-08 23:11    [W:0.042 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site