lkml.org 
[lkml]   [2018]   [Oct]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/2] dt-bindings: mailbox: Add Xilinx IPI Mailbox
On Thu, Jan 4, 2018 at 3:53 PM Wendy Liang <wendy.liang@xilinx.com> wrote:
>
> Xilinx ZynqMP IPI(Inter Processor Interrupt) is a hardware block
> in ZynqMP SoC used for the communication between various processor
> systems.
>
> Signed-off-by: Wendy Liang <jliang@xilinx.com>
> ---
> .../bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt | 104 +++++++++++++++++++++
> 1 file changed, 104 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
>
> diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
> new file mode 100644
> index 0000000..5e270a3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt
> @@ -0,0 +1,104 @@
> +Xilinx IPI Mailbox Controller
> +========================================
> +
> +The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage
> +messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI
> +agent owns registers used for notification and buffers for message.
> +
> + +-------------------------------------+
> + | Xilinx ZynqMP IPI Controller |
> + +-------------------------------------+
> + +--------------------------------------------------+
> +ATF | |
> + | |
> + | |
> + +--------------------------+ |
> + | |
> + | |
> + +--------------------------------------------------+
> + +------------------------------------------+
> + | +----------------+ +----------------+ |
> +Hardware | | IPI Agent | | IPI Buffers | |
> + | | Registers | | | |
> + | | | | | |
> + | +----------------+ +----------------+ |
> + | |
> + | Xilinx IPI Agent Block |
> + +------------------------------------------+
> +
> +
> +Controller Device Node:
> +===========================
> +Required properties:
> +--------------------
> +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox"
> +- reg: IPI buffers address ranges
> +- reg-names: Names of the reg resources. It should have:
> + * local_request_region
> + - IPI request msg buffer written by local and read
> + by remote
> + * local_response_region
> + - IPI response msg buffer written by local and read
> + by remote
> + * remote_request_region
> + - IPI request msg buffer written by remote and read
> + by local
> + * remote_response_region
> + - IPI response msg buffer written by remote and read
> + by local
> +- #mbox-cells: Shall be 1. It contains:
> + * tx(0) or rx(1) channel
> +- xlnx,ipi-ids: Xilinx IPI agent IDs of the two peers of the
> + Xilinx IPI communication channel.
> +- interrupt-parent: Phandle for the interrupt controller
> +- interrupts: Interrupt information corresponding to the
> + interrupt-names property.
> +
> +Optional properties:
> +--------------------
> +- method: The method of accessing the IPI agent registers.
> + Permitted values are: "smc" and "hvc". Default is
> + "smc".
> +
> +Example:
> +===========================
> + /* APU<->RPU0 IPI mailbox controller */
> + ipi_mailbox_rpu0: mailbox@ff90400 {
> + compatible = "xlnx,zynqmp-ipi-mailbox";
> + reg = <0x0 0xff990400 0x0 0x20>,
> + <0x0 0xff990420 0x0 0x20>,
> + <0x0 0xff990080 0x0 0x20>,
> + <0x0 0xff9900a0 0x0 0x20>;
> + reg-names = "local_request_region", "local_response_region",
> + "remote_request_region", "remote_response_region";
> + #mbox-cells = <1>;
> + xlnx-ipi-ids = <0 1>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 29 4>;
> + };
> + /* APU<->RPU1 IPI mailbox controller */
> + ipi_mailbox_rpu1: mailbox@ff990440 {
> + compatible = "xlnx,zynqmp-ipi-mailbox";
> + reg = <0x0 0xff990440 0x0 0x20>,
> + <0x0 0xff990460 0x0 0x20>,
> + <0x0 0xff990280 0x0 0x20>,
> + <0x0 0xff9902a0 0x0 0x20>;
> + reg-names = "local_request_region", "local_response_region",
> + "remote_request_region", "remote_response_region";
> + #mbox-cells = <1>;
> + xlnx-ipi-ids = <0 2>;
> + interrupt-parent = <&gic>;
> + interrupts = <0 29 4>;
> + };
The Xilinx IPI hardware one IPI agent contains multiple IPI mailboxes.
Please make ipi mailbox as subnodes to the IPI agent device node.
> + rpu0 {
> + ...
> + mboxes = <&ipi_mailbox_rpu0 0>,
> + <&ipi_mailbox_rpu0 1>;
> + mbox-names = "tx", "rx";
> + };
> + rpu1 {
> + ...
> + mboxes = <&ipi_mailbox_rpu1 0>,
> + <&ipi_mailbox_rpu1 1>;
> + mbox-names = "tx", "rx";
> + };
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-10-09 20:27    [W:0.291 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site