lkml.org 
[lkml]   [2018]   [Oct]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/5] Add initial pinctrl support for MT6797 SoC
Date
This patchset adds initial pinctrl support for Mediatek MT6797 SoC.
The pinctrl driver is based on the vendor binding as like MT6765 and
implements only GPIO and pinmux functionalities.

The devicetree binding doc is not added because it does not exist for
MT6765 and I'm not sure about the structure of it.

This patchset has been tested on 96Boards MediatekX20 development board.

Thanks,
Mani

Manivannan Sadhasivam (5):
dt-bindings: pinctrl: Add devicetree constants for MT6797 SoC
arm64: dts: mediatek: mt6797: Add pinctrl support
arm64: dts: mediatek: x20: Add pinmux support for UART1
pinctrl: mediatek: pinctrl-mtk-common-v2: Make eint_m u16
pinctrl: mediatek: Add initial pinctrl driver for MT6797 SoC

.../boot/dts/mediatek/mt6797-x20-dev.dts | 2 +
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 21 +
drivers/pinctrl/mediatek/Kconfig | 7 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt6797.c | 82 +
.../pinctrl/mediatek/pinctrl-mtk-common-v2.h | 2 +-
drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h | 2430 +++++++++++++++++
include/dt-bindings/pinctrl/mt6797-pinfunc.h | 1368 ++++++++++
8 files changed, 3912 insertions(+), 1 deletion(-)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt6797.c
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6797.h
create mode 100644 include/dt-bindings/pinctrl/mt6797-pinfunc.h

--
2.17.1

\
 
 \ /
  Last update: 2018-10-08 21:14    [W:0.116 / U:1.452 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site