lkml.org 
[lkml]   [2018]   [Oct]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 3/3] gpiolib: Show correct direction from the beginning
On 10/05/2018 11:17 AM, Jeffrey Hugo wrote:>
> Looks like the driver is initing just fine to me. Is setting up the
> jumpers and running gpio-test warranted?

Well, that test only makes sure that input/output is actually working
on the hardware level, but it also makes sure that the GPIOs are
numbered correctly.

If you want, just put a printk(... offset) in msm_gpio_get() and read
from a GPIO that you know you have access to, and make sure the
'offset' is correct.

Then try reading from a GPIO that you don't have access to, and make
sure you get a failure before msm_gpio_get() is called.

\
 
 \ /
  Last update: 2018-10-05 18:55    [W:0.165 / U:4.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site