lkml.org 
[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v4 00/10] Allwinner H6 USB support
Date
This patchset introduces support for the USB ports (both USB2 and USB3)
on the Allwinner H6 SoC.

The first 6 PATCHes are the USB2 part, and the latter 4 PATCHes are the
USB3 part.

PATCH 1, 2, 3, 7, 8 should go through the PHY tree, and the remaining
patches should go through the armsoc tree via sunxi tree.

Icenowy Zheng (10):
dt-bindings: phy: add binding for Allwinner H6 USB2 PHY
phy: sun4i-usb: add support for missing USB PHY index
phy: sun4i-usb: add support for H6 USB2 PHY
arm64: allwinner: dts: h6: add USB2-related device nodes
arm64: allwinner: dts: h6: add USB Vbus regulator
arm64: allwinner: dts: h6: enable USB2 on Pine H64
dt-bindings: phy: add binding for Allwinner USB3 PHY
phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC
arm64: allwinner: dts: h6: add USB3 device nodes
arm64: allwinner: dts: h6: enable USB3 port on Pine H64

.../devicetree/bindings/phy/sun4i-usb-phy.txt | 8 +-
.../bindings/phy/sun50i-usb3-phy.txt | 23 ++
.../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 46 ++++
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 113 +++++++++
drivers/phy/allwinner/Kconfig | 12 +
drivers/phy/allwinner/Makefile | 1 +
drivers/phy/allwinner/phy-sun4i-usb.c | 26 +-
drivers/phy/allwinner/phy-sun50i-usb3.c | 239 ++++++++++++++++++
8 files changed, 463 insertions(+), 5 deletions(-)
create mode 100644 Documentation/devicetree/bindings/phy/sun50i-usb3-phy.txt
create mode 100644 drivers/phy/allwinner/phy-sun50i-usb3.c

--
2.18.0

\
 
 \ /
  Last update: 2018-10-04 14:29    [W:0.173 / U:0.600 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site