lkml.org 
[lkml]   [2018]   [Oct]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v5 7/8] dt-binding: mtd: Document gpio-addr-flash
Hi Boris
On Wed, Oct 3, 2018 at 11:27 PM Boris Brezillon
<boris.brezillon@bootlin.com> wrote:
>
> On Wed, 3 Oct 2018 21:38:58 +0200
> Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> wrote:
>
> > Add documentation for gpio-addr-flash. This binding allow creating
> > flash devices that are paged using GPIOs.
> >
> > Cc: devicetree@vger.kernel.org
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
> > ---
> > .../bindings/mtd/gpio-addr-flash.txt | 54 +++++++++++++++++++
> > 1 file changed, 54 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
> >
> > diff --git a/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt b/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
> > new file mode 100644
> > index 000000000000..5006a26e1753
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mtd/gpio-addr-flash.txt
> > @@ -0,0 +1,54 @@
> > +Memory Mapped flash with some address lines addressed using GPIOs
> > +
> > +Handle the case where a flash device is mostly addressed using physical
> > +line and supplemented by GPIOs. This way you can hook up say a 8MiB flash
> > +to a 2MiB memory range and use the GPIOs to select a particular range.
> > +
> > + - compatible : "cfi-gpio-addr-flash"
> > + - reg : Address range of the mtd chip that is memory mapped, this is,
> > + on the previous example 2MiB.
> > + - bank-width : Width (in bytes) of the bank. Equal to the
> > + device width times the number of interleaved chips.
> > + - gpios: List of GPIO specifiers that will be used to address the MSBs address
> > + lines. The order goes from LSB to MSB.
> > + - probe-type : (optional) "cfi_probe", "jedec_probe". How the mtd chip
> > + is going to be probed. If omitted, assumed to be equal to "cfi_probe".
>
> Looks like other bindings are encoding the probe type in the
> compatible [1][2], and we should probably follow what's been done by
> others.

If I understood it right, they are special cases of physmap_of_core.c
https://elixir.bootlin.com/linux/v4.18.11/source/drivers/mtd/maps/physmap_of_core.c#L242

The driver that handles the compatible is physmap_of_core.c, and afaik
multiple drivers with the same
compatible string is a very bad idea.

We can convert the driver to something like Versatile or gemini, but
then we will not support platform devices

btw, the binding that I am used is used by:
https://elixir.bootlin.com/linux/v4.18.11/source/drivers/mtd/maps/physmap_of_core.c#L91

Yes, I know is obsolete

Tomorrow morning I will try to address your comments, test in hw and resend

Thanks




>
> > + - #address-cells, #size-cells : Must be present if the device has
> > + sub-nodes representing partitions (see below). In this case
> > + both #address-cells and #size-cells must be equal to 1.
> > +
> > +The device tree may optionally contain sub-nodes describing partitions of the
> > +address space. Check partition.txt for more details.
> > +
> > +Example:
> > +
> > + flash@300000 {
> > + #address-cells = <1>;
> > + #size-cells = <1>;
>
> You should not have the #address-cells and #size-cells props defined at
> this level, it's done in the partitions node already.
>
> > + compatible = "cfi-gpio-addr-flash";
> > + bank-width = <2>;
> > + reg = < 0x00300000 0x00200000 >;
> > + gpios = <&gpio_0 3 0>, <&gpio_0 4 0>;
> > + partitions {
> > + compatible = "fixed-partitions";
> > + #address-cells = <1>;
> > + #size-cells = <1>;
> > +
> > + partition@0 {
> > + reg = < 0x0 0x200000 >;
> > + label = "Golden Bitstream";
> > + };
> > + partition@200000 {
> > + reg = < 0x200000 0x200000 >;
> > + label = "User Bitstream";
> > + };
> > + partition@400000 {
> > + reg = < 0x400000 0x200000 >;
> > + label = "V4L Controls";
> > + };
> > + partition@600000 {
> > + reg = < 0x600000 0x200000 >;
> > + label = "Production Data";
> > + };
> > + }
> > + } ;
>
> [1]https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/mtd/cortina,gemini-flash.txt
> [2]https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/mtd/arm-versatile.txt



--
Ricardo Ribalda

\
 
 \ /
  Last update: 2018-10-03 23:55    [W:0.066 / U:2.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site