lkml.org 
[lkml]   [2018]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3] xhci: Add quirk to workaround the errata seen on Cavium Thunder-X2 Soc
Date


On 10/30/2018 04:56 PM, Mathias Nyman wrote:
>
> On 30.10.2018 12:48, Cherian, George wrote:
>> Implement workaround for ThunderX2 Errata-129 (documented in
>> CN99XX Known Issues" available at Cavium support site).
>> As per ThunderX2errata-129, USB 2 device may come up as USB 1
>> if a connection to a USB 1 device is followed by another connection to
>> a USB 2 device, the link will come up as USB 1 for the USB 2 device.
>>
>> Resolution: Reset the PHY after the USB 1 device is disconnected.
>> The PHY reset sequence is done using private registers in XHCI register
>> space. After the PHY is reset we check for the PLL lock status and retry
>> the operation if it fails. From our tests, retrying 4 times is
>> sufficient.
>>
>> Add a new quirk flag XHCI_RESET_PLL_ON_DISCONNECT to invoke the
>> workaround
>> in handle_xhci_port_status().
>>
>> Signed-off-by: George Cherian <george.cherian@cavium.com>
>
> Thanks, adding to queue
>
Thank you!!
> -Mathias

Regards,
-George
\
 
 \ /
  Last update: 2018-10-30 13:29    [W:0.094 / U:2.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site