lkml.org 
[lkml]   [2018]   [Oct]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] [v3] HID: add support for Apple Magic Trackpad 2
On Tue, Oct 02, 2018 at 03:39:31PM -0700, Sean O'Brien wrote:
> On Mon, Oct 1, 2018 at 1:43 AM Benjamin Tissoires
> <benjamin.tissoires@redhat.com> wrote:
> >
> > [adding Peter, for the libinput question]
> >
> > On Fri, Sep 21, 2018 at 1:13 AM Sean O'Brien <seobrien@chromium.org> wrote:
> > >
> > > USB device
> > > Vendor 05ac (Apple)
> > > Device 0265 (Magic Trackpad 2)
> > > Bluetooth device
> > > Vendor 004c (Apple)
> > > Device 0265 (Magic Trackpad 2)
> > >
> > > Add support for Apple Magic Trackpad 2 over USB and bluetooth, putting
> > > the device in multi-touch mode.
> > >
> > > Signed-off-by: Claudio Mettler <claudio@ponyfleisch.ch>
> > > Signed-off-by: Marek Wyborski <marek.wyborski@emwesoft.com>
> > > Signed-off-by: Sean O'Brien <seobrien@chromium.org>
> > > ---
> > >
> >
> > a few nitpcks:
> >
> > > drivers/hid/hid-ids.h | 1 +
> > > drivers/hid/hid-magicmouse.c | 149 +++++++++++++++++++++++++++++++----
> > > 2 files changed, 134 insertions(+), 16 deletions(-)
> > >
> > > diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
> > > index 5146ee029db4..bb0cd212c7cc 100644
> > > --- a/drivers/hid/hid-ids.h
> > > +++ b/drivers/hid/hid-ids.h
> > > @@ -92,6 +92,7 @@
> > > #define USB_DEVICE_ID_APPLE_MIGHTYMOUSE 0x0304
> > > #define USB_DEVICE_ID_APPLE_MAGICMOUSE 0x030d
> > > #define USB_DEVICE_ID_APPLE_MAGICTRACKPAD 0x030e
> > > +#define USB_DEVICE_ID_APPLE_MAGICTRACKPAD2 0x0265
> > > #define USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI 0x020e
> > > #define USB_DEVICE_ID_APPLE_FOUNTAIN_ISO 0x020f
> > > #define USB_DEVICE_ID_APPLE_GEYSER_ANSI 0x0214
> > > diff --git a/drivers/hid/hid-magicmouse.c b/drivers/hid/hid-magicmouse.c
> > > index b454c4386157..6a3a6c83e509 100644
> > > --- a/drivers/hid/hid-magicmouse.c
> > > +++ b/drivers/hid/hid-magicmouse.c
> > > @@ -54,6 +54,8 @@ module_param(report_undeciphered, bool, 0644);
> > > MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state field using a MSC_RAW event");
> > >
> > > #define TRACKPAD_REPORT_ID 0x28
> > > +#define TRACKPAD2_USB_REPORT_ID 0x02
> > > +#define TRACKPAD2_BT_REPORT_ID 0x31
> > > #define MOUSE_REPORT_ID 0x29
> > > #define DOUBLE_REPORT_ID 0xf7
> > > /* These definitions are not precise, but they're close enough. (Bits
> > > @@ -91,6 +93,17 @@ MODULE_PARM_DESC(report_undeciphered, "Report undeciphered multi-touch state fie
> > > #define TRACKPAD_RES_Y \
> > > ((TRACKPAD_MAX_Y - TRACKPAD_MIN_Y) / (TRACKPAD_DIMENSION_Y / 100))
> > >
> > > +#define TRACKPAD2_DIMENSION_X (float)16000
> > > +#define TRACKPAD2_MIN_X -3678
> > > +#define TRACKPAD2_MAX_X 3934
> > > +#define TRACKPAD2_RES_X \
> > > + ((TRACKPAD2_MAX_X - TRACKPAD2_MIN_X) / (TRACKPAD2_DIMENSION_X / 100))
> > > +#define TRACKPAD2_DIMENSION_Y (float)11490
> > > +#define TRACKPAD2_MIN_Y -2478
> > > +#define TRACKPAD2_MAX_Y 2587
> > > +#define TRACKPAD2_RES_Y \
> > > + ((TRACKPAD2_MAX_Y - TRACKPAD2_MIN_Y) / (TRACKPAD2_DIMENSION_Y / 100))
> > > +
> > > /**
> > > * struct magicmouse_sc - Tracks Magic Mouse-specific data.
> > > * @input: Input device through which we report events.
> > > @@ -183,6 +196,7 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> > > {
> > > struct input_dev *input = msc->input;
> > > int id, x, y, size, orientation, touch_major, touch_minor, state, down;
> > > + int pressure = 0;
> > >
> > > if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
> > > id = (tdata[6] << 2 | tdata[5] >> 6) & 0xf;
> > > @@ -194,6 +208,20 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> > > touch_minor = tdata[4];
> > > state = tdata[7] & TOUCH_STATE_MASK;
> > > down = state != TOUCH_STATE_NONE;
> > > + } else if (input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + id = tdata[8] & 0xf;
> > > + x = (tdata[1] << 27 | tdata[0] << 19) >> 19;
> > > + y = -((tdata[3] << 30 | tdata[2] << 22 | tdata[1] << 14) >> 19);
> > > + size = tdata[6];
> > > + orientation = (tdata[8] >> 5) - 4;
> > > + touch_major = tdata[4];
> > > + touch_minor = tdata[5];
> > > + /* Add to pressure to prevent libraries such as libinput
> > > + * from ignoring low pressure touches
> > > + */
> > > + pressure = tdata[7] + 30;
> >
> > Peter, can you have a look?
> >
> > To me, while adding this threshold, you are basically fooling
> > userspace, and we might want to come back to the raw values at some
> > point.
> > If there is a userspace problem, it has to be solved in userspace.
> >
>
> I'm fine with removing the offset. I haven't personally tested using
> libinput, but the chromium OS gesture detector I've been using can
> handle pressure values of 0.

libinput uses touch major/minor but only if a threshold is defined for
that device in the quirks files (matches on VID/PID/name/...).
https://gitlab.freedesktop.org/libinput/libinput/quirks/

No existing quirk will match for this device so libinput falls back to using
pressure instead. That too can be defined per-device in the quirks but for
this VID/PID it isn't so we fall back to the default thresholds guessed
based on the pressure range (12% of the range, that's where the 30 comes
from).

Adding a quirk for this device with the required major/minor threshold (or
pressure if that's more reliable) should be enough to make it work, it
definitely doesn't require a kernel workaround.

fwiw, testing against libinput is as simple as building the git repo with
meson and running:
sudo ./builddir/libinput-debug-events
or if you want some graphical debugging (requires gtk3-devel)
sudo ./builddir/libinput-debug-gui

Cheers,
Peter


>
> > > + state = tdata[3] & 0xC0;
> > > + down = state == 0x80;
> > > } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > id = (tdata[7] << 2 | tdata[6] >> 6) & 0xf;
> > > x = (tdata[1] << 27 | tdata[0] << 19) >> 19;
> > > @@ -215,7 +243,8 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> > > /* If requested, emulate a scroll wheel by detecting small
> > > * vertical touch motions.
> > > */
> > > - if (emulate_scroll_wheel) {
> > > + if (emulate_scroll_wheel && (input->id.product !=
> > > + USB_DEVICE_ID_APPLE_MAGICTRACKPAD2)) {
> > > unsigned long now = jiffies;
> > > int step_x = msc->touches[id].scroll_x - x;
> > > int step_y = msc->touches[id].scroll_y - y;
> > > @@ -269,10 +298,14 @@ static void magicmouse_emit_touch(struct magicmouse_sc *msc, int raw_id, u8 *tda
> > > input_report_abs(input, ABS_MT_POSITION_X, x);
> > > input_report_abs(input, ABS_MT_POSITION_Y, y);
> > >
> > > + if (input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2)
> > > + input_report_abs(input, ABS_MT_PRESSURE, pressure);
> > > +
> > > if (report_undeciphered) {
> > > if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
> > > input_event(input, EV_MSC, MSC_RAW, tdata[7]);
> > > - else /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > + else if (input->id.product !=
> > > + USB_DEVICE_ID_APPLE_MAGICTRACKPAD2)
> > > input_event(input, EV_MSC, MSC_RAW, tdata[8]);
> > > }
> > > }
> > > @@ -287,6 +320,7 @@ static int magicmouse_raw_event(struct hid_device *hdev,
> > >
> > > switch (data[0]) {
> > > case TRACKPAD_REPORT_ID:
> > > + case TRACKPAD2_BT_REPORT_ID:
> > > /* Expect four bytes of prefix, and N*9 bytes of touch data. */
> > > if (size < 4 || ((size - 4) % 9) != 0)
> > > return 0;
> > > @@ -301,12 +335,22 @@ static int magicmouse_raw_event(struct hid_device *hdev,
> > > magicmouse_emit_touch(msc, ii, data + ii * 9 + 4);
> > >
> > > clicks = data[1];
> > > + break;
> > > + case TRACKPAD2_USB_REPORT_ID:
> > > + /* Expect twelve bytes of prefix and N*9 bytes of touch data. */
> > > + if (size < 12 || ((size - 12) % 9) != 0)
> > > + return 0;
> > > + npoints = (size - 12) / 9;
> > > + if (npoints > 15) {
> > > + hid_warn(hdev, "invalid size value (%d) for TRACKPAD2_USB_REPORT_ID\n",
> > > + size);
> > > + return 0;
> > > + }
> > > + msc->ntouches = 0;
> > > + for (ii = 0; ii < npoints; ii++)
> > > + magicmouse_emit_touch(msc, ii, data + ii * 9 + 12);
> > >
> > > - /* The following bits provide a device specific timestamp. They
> > > - * are unused here.
> > > - *
> > > - * ts = data[1] >> 6 | data[2] << 2 | data[3] << 10;
> > > - */
> >
> > Can you keep this comment from the original version? If your touchpad
> > doesn't have the timestamp bit, the old ones still have them, and
> > having the decoded information might help in the future.
> >
>
> Will do.
>
> > Cheers,
> > Benjamin
> >
> > > + clicks = data[1];
> > > break;
> > > case MOUSE_REPORT_ID:
> > > /* Expect six bytes of prefix, and N*8 bytes of touch data. */
> > > @@ -352,6 +396,9 @@ static int magicmouse_raw_event(struct hid_device *hdev,
> > > magicmouse_emit_buttons(msc, clicks & 3);
> > > input_report_rel(input, REL_X, x);
> > > input_report_rel(input, REL_Y, y);
> > > + } else if (input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + input_mt_sync_frame(input);
> > > + input_report_key(input, BTN_MOUSE, clicks & 1);
> > > } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > input_report_key(input, BTN_MOUSE, clicks & 1);
> > > input_mt_report_pointer_emulation(input, true);
> > > @@ -364,6 +411,7 @@ static int magicmouse_raw_event(struct hid_device *hdev,
> > > static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hdev)
> > > {
> > > int error;
> > > + int mt_flags = 0;
> > >
> > > __set_bit(EV_KEY, input->evbit);
> > >
> > > @@ -380,6 +428,22 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd
> > > __set_bit(REL_WHEEL, input->relbit);
> > > __set_bit(REL_HWHEEL, input->relbit);
> > > }
> > > + } else if (input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + /* setting the device name to ensure the same driver settings
> > > + * get loaded, whether connected through bluetooth or USB
> > > + */
> > > + input->name = "Apple Inc. Magic Trackpad 2";
> > > +
> > > + __clear_bit(EV_MSC, input->evbit);
> > > + __clear_bit(BTN_0, input->keybit);
> > > + __clear_bit(BTN_RIGHT, input->keybit);
> > > + __clear_bit(BTN_MIDDLE, input->keybit);
> > > + __set_bit(BTN_MOUSE, input->keybit);
> > > + __set_bit(INPUT_PROP_BUTTONPAD, input->propbit);
> > > + __set_bit(BTN_TOOL_FINGER, input->keybit);
> > > +
> > > + mt_flags = INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED |
> > > + INPUT_MT_TRACK;
> > > } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > /* input->keybit is initialized with incorrect button info
> > > * for Magic Trackpad. There really is only one physical
> > > @@ -402,14 +466,13 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd
> > >
> > > __set_bit(EV_ABS, input->evbit);
> > >
> > > - error = input_mt_init_slots(input, 16, 0);
> > > + error = input_mt_init_slots(input, 16, mt_flags);
> > > if (error)
> > > return error;
> > > input_set_abs_params(input, ABS_MT_TOUCH_MAJOR, 0, 255 << 2,
> > > 4, 0);
> > > input_set_abs_params(input, ABS_MT_TOUCH_MINOR, 0, 255 << 2,
> > > 4, 0);
> > > - input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
> > >
> > > /* Note: Touch Y position from the device is inverted relative
> > > * to how pointer motion is reported (and relative to how USB
> > > @@ -418,6 +481,7 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd
> > > * inverse of the reported Y.
> > > */
> > > if (input->id.product == USB_DEVICE_ID_APPLE_MAGICMOUSE) {
> > > + input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
> > > input_set_abs_params(input, ABS_MT_POSITION_X,
> > > MOUSE_MIN_X, MOUSE_MAX_X, 4, 0);
> > > input_set_abs_params(input, ABS_MT_POSITION_Y,
> > > @@ -427,7 +491,25 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd
> > > MOUSE_RES_X);
> > > input_abs_set_res(input, ABS_MT_POSITION_Y,
> > > MOUSE_RES_Y);
> > > + } else if (input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + input_set_abs_params(input, ABS_MT_PRESSURE, 0, 283, 0, 0);
> > > + input_set_abs_params(input, ABS_PRESSURE, 0, 283, 0, 0);
> > > + input_set_abs_params(input, ABS_MT_ORIENTATION, -3, 4, 0, 0);
> > > + input_set_abs_params(input, ABS_X, TRACKPAD2_MIN_X,
> > > + TRACKPAD2_MAX_X, 0, 0);
> > > + input_set_abs_params(input, ABS_Y, TRACKPAD2_MIN_Y,
> > > + TRACKPAD2_MAX_Y, 0, 0);
> > > + input_set_abs_params(input, ABS_MT_POSITION_X,
> > > + TRACKPAD2_MIN_X, TRACKPAD2_MAX_X, 0, 0);
> > > + input_set_abs_params(input, ABS_MT_POSITION_Y,
> > > + TRACKPAD2_MIN_Y, TRACKPAD2_MAX_Y, 0, 0);
> > > +
> > > + input_abs_set_res(input, ABS_X, TRACKPAD2_RES_X);
> > > + input_abs_set_res(input, ABS_Y, TRACKPAD2_RES_Y);
> > > + input_abs_set_res(input, ABS_MT_POSITION_X, TRACKPAD2_RES_X);
> > > + input_abs_set_res(input, ABS_MT_POSITION_Y, TRACKPAD2_RES_Y);
> > > } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > + input_set_abs_params(input, ABS_MT_ORIENTATION, -31, 32, 1, 0);
> > > input_set_abs_params(input, ABS_X, TRACKPAD_MIN_X,
> > > TRACKPAD_MAX_X, 4, 0);
> > > input_set_abs_params(input, ABS_Y, TRACKPAD_MIN_Y,
> > > @@ -447,7 +529,8 @@ static int magicmouse_setup_input(struct input_dev *input, struct hid_device *hd
> > >
> > > input_set_events_per_packet(input, 60);
> > >
> > > - if (report_undeciphered) {
> > > + if (report_undeciphered &&
> > > + input->id.product != USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > __set_bit(EV_MSC, input->evbit);
> > > __set_bit(MSC_RAW, input->mscbit);
> > > }
> > > @@ -465,7 +548,8 @@ static int magicmouse_input_mapping(struct hid_device *hdev,
> > > msc->input = hi->input;
> > >
> > > /* Magic Trackpad does not give relative data after switching to MT */
> > > - if (hi->input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD &&
> > > + if ((hi->input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD ||
> > > + hi->input->id.product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) &&
> > > field->flags & HID_MAIN_ITEM_RELATIVE)
> > > return -1;
> > >
> > > @@ -494,11 +578,20 @@ static int magicmouse_input_configured(struct hid_device *hdev,
> > > static int magicmouse_probe(struct hid_device *hdev,
> > > const struct hid_device_id *id)
> > > {
> > > - const u8 feature[] = { 0xd7, 0x01 };
> > > + const u8 *feature;
> > > + const u8 feature_mt[] = { 0xD7, 0x01 };
> > > + const u8 feature_mt_trackpad2_usb[] = { 0x02, 0x01 };
> > > + const u8 feature_mt_trackpad2_bt[] = { 0xF1, 0x02, 0x01 };
> > > u8 *buf;
> > > struct magicmouse_sc *msc;
> > > struct hid_report *report;
> > > int ret;
> > > + int feature_size;
> > > +
> > > + if (id->vendor == USB_VENDOR_ID_APPLE &&
> > > + id->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2 &&
> > > + hdev->type != HID_TYPE_USBMOUSE)
> > > + return 0;
> > >
> > > msc = devm_kzalloc(&hdev->dev, sizeof(*msc), GFP_KERNEL);
> > > if (msc == NULL) {
> > > @@ -532,7 +625,14 @@ static int magicmouse_probe(struct hid_device *hdev,
> > > if (id->product == USB_DEVICE_ID_APPLE_MAGICMOUSE)
> > > report = hid_register_report(hdev, HID_INPUT_REPORT,
> > > MOUSE_REPORT_ID, 0);
> > > - else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > + else if (id->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + if (id->vendor == BT_VENDOR_ID_APPLE)
> > > + report = hid_register_report(hdev, HID_INPUT_REPORT,
> > > + TRACKPAD2_BT_REPORT_ID, 0);
> > > + else /* USB_VENDOR_ID_APPLE */
> > > + report = hid_register_report(hdev, HID_INPUT_REPORT,
> > > + TRACKPAD2_USB_REPORT_ID, 0);
> > > + } else { /* USB_DEVICE_ID_APPLE_MAGICTRACKPAD */
> > > report = hid_register_report(hdev, HID_INPUT_REPORT,
> > > TRACKPAD_REPORT_ID, 0);
> > > report = hid_register_report(hdev, HID_INPUT_REPORT,
> > > @@ -546,7 +646,20 @@ static int magicmouse_probe(struct hid_device *hdev,
> > > }
> > > report->size = 6;
> > >
> > > - buf = kmemdup(feature, sizeof(feature), GFP_KERNEL);
> > > + if (id->product == USB_DEVICE_ID_APPLE_MAGICTRACKPAD2) {
> > > + if (id->vendor == BT_VENDOR_ID_APPLE) {
> > > + feature_size = sizeof(feature_mt_trackpad2_bt);
> > > + feature = feature_mt_trackpad2_bt;
> > > + } else { /* USB_VENDOR_ID_APPLE */
> > > + feature_size = sizeof(feature_mt_trackpad2_usb);
> > > + feature = feature_mt_trackpad2_usb;
> > > + }
> > > + } else {
> > > + feature_size = sizeof(feature_mt);
> > > + feature = feature_mt;
> > > + }
> > > +
> > > + buf = kmemdup(feature, feature_size, GFP_KERNEL);
> > > if (!buf) {
> > > ret = -ENOMEM;
> > > goto err_stop_hw;
> > > @@ -560,10 +673,10 @@ static int magicmouse_probe(struct hid_device *hdev,
> > > * but there seems to be no other way of switching the mode.
> > > * Thus the super-ugly hacky success check below.
> > > */
> > > - ret = hid_hw_raw_request(hdev, buf[0], buf, sizeof(feature),
> > > + ret = hid_hw_raw_request(hdev, buf[0], buf, feature_size,
> > > HID_FEATURE_REPORT, HID_REQ_SET_REPORT);
> > > kfree(buf);
> > > - if (ret != -EIO && ret != sizeof(feature)) {
> > > + if (ret != -EIO && ret != feature_size) {
> > > hid_err(hdev, "unable to request touch data (%d)\n", ret);
> > > goto err_stop_hw;
> > > }
> > > @@ -579,6 +692,10 @@ static const struct hid_device_id magic_mice[] = {
> > > USB_DEVICE_ID_APPLE_MAGICMOUSE), .driver_data = 0 },
> > > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_APPLE,
> > > USB_DEVICE_ID_APPLE_MAGICTRACKPAD), .driver_data = 0 },
> > > + { HID_BLUETOOTH_DEVICE(BT_VENDOR_ID_APPLE,
> > > + USB_DEVICE_ID_APPLE_MAGICTRACKPAD2), .driver_data = 0 },
> > > + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE,
> > > + USB_DEVICE_ID_APPLE_MAGICTRACKPAD2), .driver_data = 0 },
> > > { }
> > > };
> > > MODULE_DEVICE_TABLE(hid, magic_mice);
> > > --
> > > 2.19.0.444.g18242da7ef-goog
> > >

\
 
 \ /
  Last update: 2018-10-03 02:05    [W:3.106 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site