lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] pinctrl: meson: fix pull bits
Date
This patchset fixes the inversion between pull (up/down) and pull enable
bits on the GPIO AO bank of all amlogic when have, except the axg family.

The problem has been found while testing bias setting on the libretech
aml-s905x-cc on GPIO_AO 5. Unfortunately the bias register of this bank is
not described in the public datasheet of the s905x, but it is in the
one of the A113D, which gave a clue.

This was tested on gxl libretech aml-s905x-cc. Since all Amlogic we have
got so far derive from each other, there is no reason for things to be
any different on the meson8(b).

I would have preferred to make a single patch to fix this but the commit
introducing the mistake the is different for each SoC, so a single patch
could be more difficult/annoying to backport.

Jerome Brunet (4):
pinctrl: meson: fix gxbb ao pull register bits
pinctrl: meson: fix gxl ao pull register bits
pinctrl: meson: fix meson8 ao pull register bits
pinctrl: meson: fix meson8b ao pull register bits

drivers/pinctrl/meson/pinctrl-meson-gxbb.c | 2 +-
drivers/pinctrl/meson/pinctrl-meson-gxl.c | 2 +-
drivers/pinctrl/meson/pinctrl-meson8.c | 2 +-
drivers/pinctrl/meson/pinctrl-meson8b.c | 2 +-
4 files changed, 4 insertions(+), 4 deletions(-)

--
2.17.2

\
 
 \ /
  Last update: 2018-10-29 16:14    [W:0.098 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site