lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 7/7] arm64: dts: qcom: apq8016-sbc: Standardize LED labels
Date
For all 96Boards, the following standard is used for onboard LEDs.

green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
green:user3 default-trigger: mmc1 (SD-card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power

So lets adopt the same for APQ8016 SBC (Dragonboard410c), which is
one of the 96Boards CE platform.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Amit Kucheria <amit.kucheria@linaro.org>
---
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
index 46feedf7c989..35f95154316b 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi
@@ -300,28 +300,28 @@
compatible = "gpio-leds";

led@1 {
- label = "apq8016-sbc:green:user1";
+ label = "green:user1";
gpios = <&msmgpio 21 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "off";
};

led@2 {
- label = "apq8016-sbc:green:user2";
+ label = "green:user2";
gpios = <&msmgpio 120 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
default-state = "off";
};

led@3 {
- label = "apq8016-sbc:green:user3";
+ label = "green:user3";
gpios = <&pm8916_gpios 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc1";
default-state = "off";
};

led@4 {
- label = "apq8016-sbc:green:user4";
+ label = "green:user4";
gpios = <&pm8916_gpios 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "none";
panic-indicator;
@@ -329,14 +329,14 @@
};

led@5 {
- label = "apq8016-sbc:yellow:wlan";
+ label = "yellow:wlan";
gpios = <&pm8916_mpps 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "phy0tx";
default-state = "off";
};

led@6 {
- label = "apq8016-sbc:blue:bt";
+ label = "blue:bt";
gpios = <&pm8916_mpps 3 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "bluetooth-power";
default-state = "off";
--
2.17.1
\
 
 \ /
  Last update: 2018-10-29 10:44    [W:0.079 / U:55.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site