lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v3 1/7] arm64: dts: rockchip: ficus: Add on-board LED support
Date
Add on-board LED support for Ficus board based on the following
standard used by other 96Boards:

red:user1 default-trigger: heartbeat
red:user2 default-trigger: mmc0/disk-activity (onboard-storage)
red:user3 default-trigger: mmc1 (SD-card)
red:user4 default-trigger: none, panic-indicator
red:wlan default-trigger: phy0tx
red:bt default-trigger: hci0-power

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 78 +++++++++++++++++++
1 file changed, 78 insertions(+)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
index cce266da28cd..027d428917b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-ficus.dts
@@ -23,6 +23,52 @@
clock-output-names = "clkin_gmac";
#clock-cells = <0>;
};
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_led1>, <&user_led2>, <&user_led3>,
+ <&user_led4>, <&wlan_led>, <&bt_led>;
+
+ user_led1 {
+ label = "red:user1";
+ gpios = <&gpio4 25 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user_led2 {
+ label = "red:user2";
+ gpios = <&gpio4 26 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user_led3 {
+ label = "red:user3";
+ gpios = <&gpio4 30 0>;
+ linux,default-trigger = "mmc1";
+ };
+
+ user_led4 {
+ label = "red:user4";
+ gpios = <&gpio1 0 0>;
+ panic-indicator;
+ linux,default-trigger = "none";
+ };
+
+ wlan_active_led {
+ label = "red:wlan";
+ gpios = <&gpio1 1 0>;
+ linux,default-trigger = "phy0tx";
+ default-state = "off";
+ };
+
+ bt_active_led {
+ label = "red:bt";
+ gpios = <&gpio1 4 0>;
+ linux,default-trigger = "hci0-power";
+ default-state = "off";
+ };
+ };
};

&gmac {
@@ -66,6 +112,38 @@
<4 27 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
+
+ leds {
+ user_led1: user_led1 {
+ rockchip,pins =
+ <4 25 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ user_led2: user_led2 {
+ rockchip,pins =
+ <4 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ user_led3: user_led3 {
+ rockchip,pins =
+ <4 30 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ user_led4: user_led4 {
+ rockchip,pins =
+ <1 0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wlan_led: wlan_led {
+ rockchip,pins =
+ <1 1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_led: bt_led {
+ rockchip,pins =
+ <1 4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
};

&usbdrd_dwc3_0 {
--
2.17.1
\
 
 \ /
  Last update: 2018-10-29 10:44    [W:0.203 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site