lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 5/7] arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
    Date
    For all 96Boards, the following standard is used for onboard LEDs.

    green:user1 default-trigger: heartbeat
    green:user2 default-trigger: mmc0/disk-activity(onboard-storage)
    green:user3 default-trigger: mmc1 (SD-card)
    green:user4 default-trigger: none, panic-indicator
    yellow:wlan default-trigger: phy0tx
    blue:bt default-trigger: hci0-power

    So lets adopt the same for Poplar, which is one of the 96Boards
    Enterprise edition platform.

    Due to absence of WLAN and BT support, corresponding LED nodes are not
    considered.

    Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
    ---
    .../arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +++++++------
    1 file changed, 7 insertions(+), 6 deletions(-)

    diff --git a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
    index d30f6eb8a5ee..32716c96b457 100644
    --- a/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
    +++ b/arch/arm64/boot/dts/hisilicon/hi3798cv200-poplar.dts
    @@ -35,30 +35,31 @@
    compatible = "gpio-leds";

    user-led0 {
    - label = "USER-LED0";
    + label = "green:user1";
    gpios = <&gpio6 3 GPIO_ACTIVE_LOW>;
    linux,default-trigger = "heartbeat";
    default-state = "off";
    };

    user-led1 {
    - label = "USER-LED1";
    + label = "green:user2";
    gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
    linux,default-trigger = "mmc0";
    default-state = "off";
    };

    user-led2 {
    - label = "USER-LED2";
    + label = "green:user3";
    gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
    - linux,default-trigger = "none";
    + linux,default-trigger = "mmc1";
    default-state = "off";
    };

    user-led3 {
    - label = "USER-LED3";
    + label = "green:user4";
    gpios = <&gpio10 6 GPIO_ACTIVE_LOW>;
    - linux,default-trigger = "cpu0";
    + linux,default-trigger = "none";
    + panic-indicator;
    default-state = "off";
    };
    };
    --
    2.17.1
    \
     
     \ /
      Last update: 2018-10-29 10:01    [W:3.539 / U:0.440 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site