lkml.org 
[lkml]   [2018]   [Oct]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v2 0/7] Standardize onboard LED support for 96Boards
Date
This patchset standardizes the onboard LEDs on 96Boards by maintaining
common labels and triggers as below:

green:user1 default-trigger: heartbeat
green:user2 default-trigger: mmc0/disk-activity (onboard-storage)
green:user3 default-trigger: mmc1 (SD card)
green:user4 default-trigger: none, panic-indicator
yellow:wlan default-trigger: phy0tx
blue:bt default-trigger: hci0-power

This standardization is required to provide a common behaviour of LEDs
across all mainline supported 96Boards and also making it easier to
control it using an userspace library like MRAA.

For Rock960 and Ficus boards, the LED support is added in this patchset.
Rest of the boards are converted to adopt the standard.

Note: Since there is no UFS trigger available for now, user2 LED trigger
is set to none on HiKey960.

Thanks,
Mani

Changes in v2:

* Removed device-name from LED labels as per the suggestion from Simon
and Pavel
* Adopted APQ8016 SBC (Dragonboard410c)
* Tested the Ficus patch on Ficus V1.1 board
* CCed LED mailing list

Manivannan Sadhasivam (7):
arm64: dts: rockchip: ficus: Add on-board LED support
arm64: dts: rockchip: rock960: Add on-board LED support
arm64: dts: hisilicon: hikey: Standardize LED labels and triggers
arm64: dts: hisilicon: hikey960: Standardize LED labels and triggers
arm64: dts: hisilicon: poplar: Standardize LED labels and triggers
arm64: dts: xilinx: ultra96: Standardize LED labels and triggers
arm64: dts: qcom: apq8016-sbc: Standardize LED labels

.../boot/dts/hisilicon/hi3660-hikey960.dts | 18 ++---
.../boot/dts/hisilicon/hi3798cv200-poplar.dts | 13 +--
.../arm64/boot/dts/hisilicon/hi6220-hikey.dts | 17 ++--
arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi | 12 +--
arch/arm64/boot/dts/rockchip/rk3399-ficus.dts | 78 ++++++++++++++++++
.../boot/dts/rockchip/rk3399-rock960.dts | 79 +++++++++++++++++++
.../boot/dts/xilinx/zynqmp-zcu100-revC.dts | 15 ++--
7 files changed, 196 insertions(+), 36 deletions(-)

--
2.17.1

\
 
 \ /
  Last update: 2018-10-29 10:01    [W:0.069 / U:1.624 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site