lkml.org 
[lkml]   [2018]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2 1/3] firmware: xilinx: Add reset API's
From
Date
Hi,

Some comments below.

On 26/10/2018 15.24, Nava kishore Manne wrote:
> This Patch Adds reset API's to support release, assert
> and status functionalities by using firmware interface.
>
> Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> ---
> Changes for v2:
> -None.
>
> Changes for v1:
> -None.
>
> Changes for RFC-V3:
> -None.
>
> Changes for RFC-V2:
> -New patch.
>
> drivers/firmware/xilinx/zynqmp.c | 40 +++++++++++
> include/linux/firmware/xlnx-zynqmp.h | 136 +++++++++++++++++++++++++++++++++++
> 2 files changed, 176 insertions(+)
>
> diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
> index 84b3fd2..cd13b06 100644
> --- a/drivers/firmware/xilinx/zynqmp.c
> +++ b/drivers/firmware/xilinx/zynqmp.c
> @@ -428,6 +428,44 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
> return ret;
> }
>
> +/**
> + * zynqmp_pm_reset_assert - Request setting of reset (1 - assert, 0 - release)
> + * @reset: Reset to be configured
> + * @assert_flag: Flag stating should reset be asserted (1) or
> + * released (0)
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_reset_assert(const enum zynqmp_pm_reset reset,
> + const enum zynqmp_pm_reset_action assert_flag)
> +{
> + return zynqmp_pm_invoke_fn(PM_RESET_ASSERT, reset, assert_flag,
> + 0, 0, NULL);
> +}
> +
> +/**
> + * zynqmp_pm_reset_get_status - Get status of the reset
> + * @reset: Reset whose status should be returned
> + * @status: Returned status
> + *
> + * Return: Returns status, either success or error+reason
> + */
> +static int zynqmp_pm_reset_get_status(const enum zynqmp_pm_reset reset,
> + u32 *status)
> +{
> + u32 ret_payload[PAYLOAD_ARG_CNT];
> + int ret;
> +
> + if (!status)
> + return -EINVAL;
> +
> + ret = zynqmp_pm_invoke_fn(PM_RESET_GET_STATUS, reset, 0,
> + 0, 0, ret_payload);
> + *status = ret_payload[1];
> +
> + return ret;
> +}
> +
> static const struct zynqmp_eemi_ops eemi_ops = {
> .get_api_version = zynqmp_pm_get_api_version,
> .query_data = zynqmp_pm_query_data,
> @@ -440,6 +478,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
> .clock_getrate = zynqmp_pm_clock_getrate,
> .clock_setparent = zynqmp_pm_clock_setparent,
> .clock_getparent = zynqmp_pm_clock_getparent,
> + .reset_assert = zynqmp_pm_reset_assert,
> + .reset_get_status = zynqmp_pm_reset_get_status,
> };
>
> /**
> diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
> index 015e130..29d83ca 100644
> --- a/include/linux/firmware/xlnx-zynqmp.h
> +++ b/include/linux/firmware/xlnx-zynqmp.h
> @@ -34,6 +34,8 @@
>
> enum pm_api_id {
> PM_GET_API_VERSION = 1,
> + PM_RESET_ASSERT = 17,
> + PM_RESET_GET_STATUS,
> PM_QUERY_DATA = 35,
> PM_CLOCK_ENABLE,
> PM_CLOCK_DISABLE,
> @@ -73,6 +75,137 @@ enum pm_query_id {
> PM_QID_CLOCK_GET_ATTRIBUTES,
> };
>
> +enum zynqmp_pm_reset_action {
> + PM_RESET_ACTION_RELEASE,
> + PM_RESET_ACTION_ASSERT,
> + PM_RESET_ACTION_PULSE,
> +};
> +
> +enum zynqmp_pm_reset {
> + ZYNQMP_PM_RESET_START = 999,
> + ZYNQMP_PM_RESET_PCIE_CFG,
Why not just do:

+ ZYNQMP_PM_RESET_START = 1000,
+ ZYNQMP_PM_RESET_PCIE_CFG = 1000,

This way it would not then indicate that START is actual reset line.

> + ZYNQMP_PM_RESET_PCIE_BRIDGE,
> + ZYNQMP_PM_RESET_PCIE_CTRL,
> + ZYNQMP_PM_RESET_DP,
> + ZYNQMP_PM_RESET_SWDT_CRF,
> + ZYNQMP_PM_RESET_AFI_FM5,
> + ZYNQMP_PM_RESET_AFI_FM4,
> + ZYNQMP_PM_RESET_AFI_FM3,
> + ZYNQMP_PM_RESET_AFI_FM2,
> + ZYNQMP_PM_RESET_AFI_FM1,
> + ZYNQMP_PM_RESET_AFI_FM0,
> + ZYNQMP_PM_RESET_GDMA,
> + ZYNQMP_PM_RESET_GPU_PP1,
> + ZYNQMP_PM_RESET_GPU_PP0,
> + ZYNQMP_PM_RESET_GPU,
> + ZYNQMP_PM_RESET_GT,
> + ZYNQMP_PM_RESET_SATA,
> + ZYNQMP_PM_RESET_ACPU3_PWRON,
> + ZYNQMP_PM_RESET_ACPU2_PWRON,
> + ZYNQMP_PM_RESET_ACPU1_PWRON,
> + ZYNQMP_PM_RESET_ACPU0_PWRON,
> + ZYNQMP_PM_RESET_APU_L2,
> + ZYNQMP_PM_RESET_ACPU3,
> + ZYNQMP_PM_RESET_ACPU2,
> + ZYNQMP_PM_RESET_ACPU1,
> + ZYNQMP_PM_RESET_ACPU0,
> + ZYNQMP_PM_RESET_DDR,
> + ZYNQMP_PM_RESET_APM_FPD,
> + ZYNQMP_PM_RESET_SOFT,
> + ZYNQMP_PM_RESET_GEM0,
> + ZYNQMP_PM_RESET_GEM1,
> + ZYNQMP_PM_RESET_GEM2,
> + ZYNQMP_PM_RESET_GEM3,
> + ZYNQMP_PM_RESET_QSPI,
> + ZYNQMP_PM_RESET_UART0,
> + ZYNQMP_PM_RESET_UART1,
> + ZYNQMP_PM_RESET_SPI0,
> + ZYNQMP_PM_RESET_SPI1,
> + ZYNQMP_PM_RESET_SDIO0,
> + ZYNQMP_PM_RESET_SDIO1,
> + ZYNQMP_PM_RESET_CAN0,
> + ZYNQMP_PM_RESET_CAN1,
> + ZYNQMP_PM_RESET_I2C0,
> + ZYNQMP_PM_RESET_I2C1,
> + ZYNQMP_PM_RESET_TTC0,
> + ZYNQMP_PM_RESET_TTC1,
> + ZYNQMP_PM_RESET_TTC2,
> + ZYNQMP_PM_RESET_TTC3,
> + ZYNQMP_PM_RESET_SWDT_CRL,
> + ZYNQMP_PM_RESET_NAND,
> + ZYNQMP_PM_RESET_ADMA,
> + ZYNQMP_PM_RESET_GPIO,
> + ZYNQMP_PM_RESET_IOU_CC,
> + ZYNQMP_PM_RESET_TIMESTAMP,
> + ZYNQMP_PM_RESET_RPU_R50,
> + ZYNQMP_PM_RESET_RPU_R51,
> + ZYNQMP_PM_RESET_RPU_AMBA,
> + ZYNQMP_PM_RESET_OCM,
> + ZYNQMP_PM_RESET_RPU_PGE,
> + ZYNQMP_PM_RESET_USB0_CORERESET,
> + ZYNQMP_PM_RESET_USB1_CORERESET,
> + ZYNQMP_PM_RESET_USB0_HIBERRESET,
> + ZYNQMP_PM_RESET_USB1_HIBERRESET,
> + ZYNQMP_PM_RESET_USB0_APB,
> + ZYNQMP_PM_RESET_USB1_APB,
> + ZYNQMP_PM_RESET_IPI,
> + ZYNQMP_PM_RESET_APM_LPD,
> + ZYNQMP_PM_RESET_RTC,
> + ZYNQMP_PM_RESET_SYSMON,
> + ZYNQMP_PM_RESET_AFI_FM6,
> + ZYNQMP_PM_RESET_LPD_SWDT,
> + ZYNQMP_PM_RESET_FPD,
> + ZYNQMP_PM_RESET_RPU_DBG1,
> + ZYNQMP_PM_RESET_RPU_DBG0,
> + ZYNQMP_PM_RESET_DBG_LPD,
> + ZYNQMP_PM_RESET_DBG_FPD,
> + ZYNQMP_PM_RESET_APLL,
> + ZYNQMP_PM_RESET_DPLL,
> + ZYNQMP_PM_RESET_VPLL,
> + ZYNQMP_PM_RESET_IOPLL,
> + ZYNQMP_PM_RESET_RPLL,
> + ZYNQMP_PM_RESET_GPO3_PL_0,
> + ZYNQMP_PM_RESET_GPO3_PL_1,
> + ZYNQMP_PM_RESET_GPO3_PL_2,
> + ZYNQMP_PM_RESET_GPO3_PL_3,
> + ZYNQMP_PM_RESET_GPO3_PL_4,
> + ZYNQMP_PM_RESET_GPO3_PL_5,
> + ZYNQMP_PM_RESET_GPO3_PL_6,
> + ZYNQMP_PM_RESET_GPO3_PL_7,
> + ZYNQMP_PM_RESET_GPO3_PL_8,
> + ZYNQMP_PM_RESET_GPO3_PL_9,
> + ZYNQMP_PM_RESET_GPO3_PL_10,
> + ZYNQMP_PM_RESET_GPO3_PL_11,
> + ZYNQMP_PM_RESET_GPO3_PL_12,
> + ZYNQMP_PM_RESET_GPO3_PL_13,
> + ZYNQMP_PM_RESET_GPO3_PL_14,
> + ZYNQMP_PM_RESET_GPO3_PL_15,
> + ZYNQMP_PM_RESET_GPO3_PL_16,
> + ZYNQMP_PM_RESET_GPO3_PL_17,
> + ZYNQMP_PM_RESET_GPO3_PL_18,
> + ZYNQMP_PM_RESET_GPO3_PL_19,
> + ZNQMP_PM_RESET_GPO3_PL_20,
Typo here. Missing Y.

Thanks,
Vesa Jääskeläinen

\
 
 \ /
  Last update: 2018-10-25 22:44    [W:0.073 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site