lkml.org 
[lkml]   [2018]   [Oct]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/3] iio: adc128s052: add ACPI _HID AANT1280
From
Date


On 10/25/2018 06:46 PM, Andy Shevchenko wrote:
> On Thu, Oct 25, 2018 at 04:35:41PM +0100, Dan O'Donovan wrote:
>> From: Nicola Lunghi <nicola.lunghi@emutex.com>
>>
>> ACPI _HID AANT1280 matches an ADC124S101 present on E3940 SKUs of the UP
>> Squared board.
>>
>> Add it to the driver.
>>
>> Signed-off-by: Nicola Lunghi <nicola.lunghi@emutex.com>
>> [javier@emutex.com: fix up commit message and one checkpatch warning]
>> Signed-off-by: Javier Arteaga <javier@emutex.com>
>> Signed-off-by: Dan O'Donovan <dan@emutex.com>
>> ---
>> drivers/iio/adc/ti-adc128s052.c | 18 +++++++++++++++++-
>> 1 file changed, 17 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/iio/adc/ti-adc128s052.c b/drivers/iio/adc/ti-adc128s052.c
>> index e6716c3..c2d1453 100644
>> --- a/drivers/iio/adc/ti-adc128s052.c
>> +++ b/drivers/iio/adc/ti-adc128s052.c
>> @@ -12,10 +12,12 @@
>> * published by the Free Software Foundation.
>> */
>>
>> +#include <linux/acpi.h>
>> #include <linux/err.h>
>> #include <linux/spi/spi.h>
>> #include <linux/module.h>
>> #include <linux/iio/iio.h>
>> +#include <linux/property.h>
>> #include <linux/regulator/consumer.h>
>>
>> struct adc128_configuration {
>> @@ -135,10 +137,15 @@ static const struct iio_info adc128_info = {
>> static int adc128_probe(struct spi_device *spi)
>> {
>> struct iio_dev *indio_dev;
>> + unsigned int config;
>> struct adc128 *adc;
>> - int config = spi_get_device_id(spi)->driver_data;
>> int ret;
>>
>> + if (dev_fwnode(&spi->dev))
>> + config = (unsigned long) device_get_match_data(&spi->dev);
>> + else
>> + config = spi_get_device_id(spi)->driver_data;
>> +
>> indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*adc));
>> if (!indio_dev)
>> return -ENOMEM;
>> @@ -207,10 +214,19 @@ static const struct spi_device_id adc128_id[] = {
>> };
>> MODULE_DEVICE_TABLE(spi, adc128_id);
>>
>> +#ifdef CONFIG_ACPI
>> +static const struct acpi_device_id adc128_acpi_match[] = {
>
>> + { "AANT1280", 2 }, /* ADC124S021 compatible ACPI ID */
>
> Looking how driver is organized and what ACPI can provide I would highly
> recommend to look forward to PTYP field for utilization of the type of the HW.
>
> Maybe it would not work with published BIOSes, but would be good for the future
> (in that case anybody can utilize that _HID + PTYP pair on their platforms).
>
Thanks Andy for your review and feedback. Your _HID + PTYP suggestion sounds
interesting, but I couldn't find any information in the ACPI spec or elsewhere
about how/when/where to use it. It isn't used in the UP Squared ACPI tables.
Do you have any links or other information you could share about it? Thanks!

>> + { }
>> +};
>> +MODULE_DEVICE_TABLE(acpi, adc128_acpi_match);
>> +#endif
>> +
>> static struct spi_driver adc128_driver = {
>> .driver = {
>> .name = "adc128s052",
>
>> .of_match_table = of_match_ptr(adc128_of_match),
>> + .acpi_match_table = ACPI_PTR(adc128_acpi_match),
>> },
>> .probe = adc128_probe,
>> .remove = adc128_remove,
>> --
>> 2.7.4
>>
>>
>> ------
>> This email has been scanned for spam and malware by The Email Laundry.
>>
>

------
This email has been scanned for spam and malware by The Email Laundry.

\
 
 \ /
  Last update: 2018-10-26 12:14    [W:0.087 / U:19.540 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site