lkml.org 
[lkml]   [2018]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] Bluetooth: Add quirk for reading BD_ADDR from fwnode property
On 2018-10-25 05:51, Matthias Kaehlcke wrote:
> Add HCI_QUIRK_USE_BDADDR_PROPERTY to allow controllers to retrieve
> the public Bluetooth address from the firmware node property
> 'local-bd-address'. If quirk is set and the property does not exist
> or is invalid the controller is marked as unconfigured.
>
> Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
> ---
> hci_dev_get_bd_addr_from_property() currently assumes that the
> firmware node with 'local-bd-address' is from hdev->dev.parent, not
> sure if this universally true. However if it is true for existing
> device that might use this interface we can assume this for now
> (unless there is a clear solution now), and cross the bridge of
> finding an alternative when we actually encounter the situation.
> One option could be to look for the first parent that has a fwnode.
> ---
> include/net/bluetooth/hci.h | 12 +++++++++++
> net/bluetooth/hci_core.c | 42 +++++++++++++++++++++++++++++++++++++
> net/bluetooth/mgmt.c | 6 ++++--
> 3 files changed, 58 insertions(+), 2 deletions(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index cdd9f1fe7cfa..a5d748099752 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -158,6 +158,18 @@ enum {
> */
> HCI_QUIRK_INVALID_BDADDR,
>
> + /* When this quirk is set, the public Bluetooth address
> + * initially reported by HCI Read BD Address command
> + * is considered invalid. The public BD Address can be
> + * specified in the fwnode property 'local-bd-address'.
> + * If this property does not exist or is invalid controller
> + * configuration is required before this device can be used.
> + *
> + * This quirk can be set before hci_register_dev is called or
> + * during the hdev->setup vendor callback.
> + */
> + HCI_QUIRK_USE_BDADDR_PROPERTY,
> +
> /* When this quirk is set, the duplicate filtering during
> * scanning is based on Bluetooth devices addresses. To allow
> * RSSI based updates, restart scanning if needed.
> diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
> index 74b29c7d841c..97214262c4fb 100644
> --- a/net/bluetooth/hci_core.c
> +++ b/net/bluetooth/hci_core.c
> @@ -30,6 +30,7 @@
> #include <linux/rfkill.h>
> #include <linux/debugfs.h>
> #include <linux/crypto.h>
> +#include <linux/property.h>
> #include <asm/unaligned.h>
>
> #include <net/bluetooth/bluetooth.h>
> @@ -1355,9 +1356,40 @@ int hci_inquiry(void __user *arg)
> return err;
> }
>
> +/**
> + * hci_dev_get_bd_addr_from_property - Get the Bluetooth Device
> Address
> + * (BD_ADDR) for a HCI device from
> + * a firmware node property.
> + * @hdev: The HCI device
> + *
> + * Search the firmware node for 'local-bd-address'.
> + *
> + * All-zero BD addresses are rejected, because those could be
> properties
> + * that exist in the firmware tables, but were not updated by the
> firmware. For
> + * example, the DTS could define 'local-bd-address', with zero BD
> addresses.
> + */
> +static int hci_dev_get_bd_addr_from_property(struct hci_dev *hdev)
> +{
> + struct fwnode_handle *fwnode = dev_fwnode(hdev->dev.parent);
> + bdaddr_t ba;
> + int ret;
> +
> + ret = fwnode_property_read_u8_array(fwnode, "local-bd-address",
> + (u8 *)&ba, sizeof(ba));
> + if (ret < 0)
> + return ret;
> + if (!bacmp(&ba, BDADDR_ANY))
> + return -ENODATA;
> +
> + hdev->public_addr = ba;
> +
> + return 0;
> +}
> +
> static int hci_dev_do_open(struct hci_dev *hdev)
> {
> int ret = 0;
> + bool bd_addr_set = false;
>
> BT_DBG("%s %p", hdev->name, hdev);
>
> @@ -1422,6 +1454,16 @@ static int hci_dev_do_open(struct hci_dev *hdev)
> if (hdev->setup)
> ret = hdev->setup(hdev);
>
> + if (test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) {
> + if (!hci_dev_get_bd_addr_from_property(hdev))
> + if (hdev->set_bdaddr &&
> + !hdev->set_bdaddr(hdev, &hdev->public_addr))
> + bd_addr_set = true;
> +
> + if (!bd_addr_set)
> + hci_dev_set_flag(hdev, HCI_UNCONFIGURED);
> + }
> +
> /* The transport driver can set these quirks before
> * creating the HCI device or in its setup callback.
> *
> diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
> index 3bdc8f3ca259..3d9edb752403 100644
> --- a/net/bluetooth/mgmt.c
> +++ b/net/bluetooth/mgmt.c
> @@ -551,7 +551,8 @@ static bool is_configured(struct hci_dev *hdev)
> !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
> return false;
>
> - if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
> + if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
> + test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
> !bacmp(&hdev->public_addr, BDADDR_ANY))
> return false;
>
> @@ -566,7 +567,8 @@ static __le32 get_missing_options(struct hci_dev
> *hdev)
> !hci_dev_test_flag(hdev, HCI_EXT_CONFIGURED))
> options |= MGMT_OPTION_EXTERNAL_CONFIG;
>
> - if (test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) &&
> + if ((test_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks) ||
> + test_bit(HCI_QUIRK_USE_BDADDR_PROPERTY, &hdev->quirks)) &&
> !bacmp(&hdev->public_addr, BDADDR_ANY))
> options |= MGMT_OPTION_PUBLIC_ADDRESS;

Looks fine to me.

Reviewed-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
--
Regards
Balakrishna.

\
 
 \ /
  Last update: 2018-10-25 16:37    [W:0.065 / U:2.224 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site