lkml.org 
[lkml]   [2018]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 3.18 14/98] ARM: shmobile: r8a7740: Instantiate GIC from C board code in legacy builds
Date
From: Geert Uytterhoeven <geert+renesas@glider.be>

[ Upstream commit d034f53cc6c5c09a4e10cb9716986f3844c58514 ]

As of commit 9a1091ef0017c40a ("irqchip: gic: Support hierarchy irq
domain."), armadillo-legacy hangs during boot with:

sh-tmu.0: ch0: used for clock events
sh-tmu.0: ch0: used for periodic clock events
sh-tmu.0: ch0: failed to request irq 230
sh-tmu.0: ch1: used as clock source
sh-cmt-48.1: ch0: failed to request irq 90
sh-cmt-48.1: ch0: registration failed
earlytimer: unable to probe sh-cmt-48 early.
Calibrating delay loop...

This happens because the IRQ numbers of the GIC are now virtual, and no
longer match the hardcoded hardware IRQ numbers in the platform board
code.
To fix this, instantiate the GIC from platform board code when compiling
a legacy kernel, like is done on sh73a0 for kzm9g-legacy.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/mach-shmobile/setup-r8a7740.c | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/mach-shmobile/setup-r8a7740.c b/arch/arm/mach-shmobile/setup-r8a7740.c
index 8894e1b7ab0e..6ccdc4574c89 100644
--- a/arch/arm/mach-shmobile/setup-r8a7740.c
+++ b/arch/arm/mach-shmobile/setup-r8a7740.c
@@ -792,7 +792,14 @@ void __init r8a7740_init_irq_of(void)
void __iomem *intc_msk_base = ioremap_nocache(0xe6900040, 0x10);
void __iomem *pfc_inta_ctrl = ioremap_nocache(0xe605807c, 0x4);

+#ifdef CONFIG_ARCH_SHMOBILE_LEGACY
+ void __iomem *gic_dist_base = ioremap_nocache(0xc2800000, 0x1000);
+ void __iomem *gic_cpu_base = ioremap_nocache(0xc2000000, 0x1000);
+
+ gic_init(0, 29, gic_dist_base, gic_cpu_base);
+#else
irqchip_init();
+#endif

/* route signals to GIC */
iowrite32(0x0, pfc_inta_ctrl);
--
2.17.1
\
 
 \ /
  Last update: 2018-10-25 16:30    [W:0.282 / U:3.552 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site