lkml.org 
[lkml]   [2018]   [Oct]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 2/8] mfd: stpmic1: add stpmic1 driver
On Thu, 18 Oct 2018, Pascal PAILLET-LME wrote:

> From: pascal paillet <p.paillet@st.com>
>
> stpmic1 is a pmic from STMicroelectronics. The STPMIC1 integrates 10
> regulators , 3 switches, a watchdog and an input for a power on key.

Same comments as for the DT binding patch.

> Signed-off-by: pascal paillet <p.paillet@st.com>
> ---
> changes in v4:
> * rename PONKEY_PU_ACTIVE to PONKEY_PU_INACTIVE
>
> drivers/mfd/Kconfig | 13 ++
> drivers/mfd/Makefile | 1 +
> drivers/mfd/stpmic1.c | 401 ++++++++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++
> 4 files changed, 627 insertions(+)
> create mode 100644 drivers/mfd/stpmic1.c
> create mode 100644 include/linux/mfd/stpmic1.h
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 11841f4..b8dabc7 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -1855,6 +1855,19 @@ config MFD_STM32_TIMERS
> for PWM and IIO Timer. This driver allow to share the
> registers between the others drivers.
>
> +config MFD_STPMIC1
> + tristate "Support for STPMIC1 PMIC"
> + depends on (I2C=y && OF)
> + select REGMAP_I2C
> + select REGMAP_IRQ
> + select MFD_CORE
> + help
> + Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 MFD driver is

Remove 'MFD' and replace with something else.

MFD is not a real thing. It's a Linuxisum.

> + the core driver for STPMIC1 component that mainly handles interrupts.

You need to document what the child devices are.

> + To compile this driver as a module, choose M here: the
> + module will be called stpmic1.
> +
> menu "Multimedia Capabilities Port drivers"
> depends on ARCH_SA1100
>
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 5856a94..76fff14 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -232,6 +232,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
>
> obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
> +obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
> obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
>
> obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
> diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
> new file mode 100644
> index 0000000..90dfee4
> --- /dev/null
> +++ b/drivers/mfd/stpmic1.c
> @@ -0,0 +1,401 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) STMicroelectronics 2018

'\n' here.

> +// Author: Pascal Paillet <p.paillet@st.com>
> +
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/core.h>
> +#include <linux/mfd/stpmic1.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_wakeirq.h>
> +#include <linux/regmap.h>
> +
> +#include <dt-bindings/mfd/st,stpmic1.h>
> +
> +#define STPMIC1_MAIN_IRQ 0
> +#define STPMIC1_WAKEUP_IRQ 1
> +
> +static bool stpmic1_reg_readable(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case TURN_ON_SR:
> + case TURN_OFF_SR:
> + case ICC_LDO_TURN_OFF_SR:
> + case ICC_BUCK_TURN_OFF_SR:
> + case RREQ_STATE_SR:
> + case VERSION_SR:
> + case SWOFF_PWRCTRL_CR:
> + case PADS_PULL_CR:
> + case BUCKS_PD_CR:
> + case LDO14_PD_CR:
> + case LDO56_VREF_PD_CR:
> + case VBUS_DET_VIN_CR:
> + case PKEY_TURNOFF_CR:
> + case BUCKS_MASK_RANK_CR:
> + case BUCKS_MASK_RESET_CR:
> + case LDOS_MASK_RANK_CR:
> + case LDOS_MASK_RESET_CR:
> + case WCHDG_CR:
> + case WCHDG_TIMER_CR:
> + case BUCKS_ICCTO_CR:
> + case LDOS_ICCTO_CR:
> + case BUCK1_ACTIVE_CR:
> + case BUCK2_ACTIVE_CR:
> + case BUCK3_ACTIVE_CR:
> + case BUCK4_ACTIVE_CR:
> + case VREF_DDR_ACTIVE_CR:
> + case LDO1_ACTIVE_CR:
> + case LDO2_ACTIVE_CR:
> + case LDO3_ACTIVE_CR:
> + case LDO4_ACTIVE_CR:
> + case LDO5_ACTIVE_CR:
> + case LDO6_ACTIVE_CR:
> + case BUCK1_STDBY_CR:
> + case BUCK2_STDBY_CR:
> + case BUCK3_STDBY_CR:
> + case BUCK4_STDBY_CR:
> + case VREF_DDR_STDBY_CR:
> + case LDO1_STDBY_CR:
> + case LDO2_STDBY_CR:
> + case LDO3_STDBY_CR:
> + case LDO4_STDBY_CR:
> + case LDO5_STDBY_CR:
> + case LDO6_STDBY_CR:
> + case BST_SW_CR:
> + case INT_PENDING_R1:
> + case INT_PENDING_R2:
> + case INT_PENDING_R3:
> + case INT_PENDING_R4:
> + case INT_DBG_LATCH_R1:
> + case INT_DBG_LATCH_R2:
> + case INT_DBG_LATCH_R3:
> + case INT_DBG_LATCH_R4:
> + case INT_CLEAR_R1:
> + case INT_CLEAR_R2:
> + case INT_CLEAR_R3:
> + case INT_CLEAR_R4:
> + case INT_MASK_R1:
> + case INT_MASK_R2:
> + case INT_MASK_R3:
> + case INT_MASK_R4:
> + case INT_SET_MASK_R1:
> + case INT_SET_MASK_R2:
> + case INT_SET_MASK_R3:
> + case INT_SET_MASK_R4:
> + case INT_CLEAR_MASK_R1:
> + case INT_CLEAR_MASK_R2:
> + case INT_CLEAR_MASK_R3:
> + case INT_CLEAR_MASK_R4:
> + case INT_SRC_R1:
> + case INT_SRC_R2:
> + case INT_SRC_R3:
> + case INT_SRC_R4:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool stpmic1_reg_writeable(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case SWOFF_PWRCTRL_CR:
> + case PADS_PULL_CR:
> + case BUCKS_PD_CR:
> + case LDO14_PD_CR:
> + case LDO56_VREF_PD_CR:
> + case VBUS_DET_VIN_CR:
> + case PKEY_TURNOFF_CR:
> + case BUCKS_MASK_RANK_CR:
> + case BUCKS_MASK_RESET_CR:
> + case LDOS_MASK_RANK_CR:
> + case LDOS_MASK_RESET_CR:
> + case WCHDG_CR:
> + case WCHDG_TIMER_CR:
> + case BUCKS_ICCTO_CR:
> + case LDOS_ICCTO_CR:
> + case BUCK1_ACTIVE_CR:
> + case BUCK2_ACTIVE_CR:
> + case BUCK3_ACTIVE_CR:
> + case BUCK4_ACTIVE_CR:
> + case VREF_DDR_ACTIVE_CR:
> + case LDO1_ACTIVE_CR:
> + case LDO2_ACTIVE_CR:
> + case LDO3_ACTIVE_CR:
> + case LDO4_ACTIVE_CR:
> + case LDO5_ACTIVE_CR:
> + case LDO6_ACTIVE_CR:
> + case BUCK1_STDBY_CR:
> + case BUCK2_STDBY_CR:
> + case BUCK3_STDBY_CR:
> + case BUCK4_STDBY_CR:
> + case VREF_DDR_STDBY_CR:
> + case LDO1_STDBY_CR:
> + case LDO2_STDBY_CR:
> + case LDO3_STDBY_CR:
> + case LDO4_STDBY_CR:
> + case LDO5_STDBY_CR:
> + case LDO6_STDBY_CR:
> + case BST_SW_CR:
> + case INT_DBG_LATCH_R1:
> + case INT_DBG_LATCH_R2:
> + case INT_DBG_LATCH_R3:
> + case INT_DBG_LATCH_R4:
> + case INT_CLEAR_R1:
> + case INT_CLEAR_R2:
> + case INT_CLEAR_R3:
> + case INT_CLEAR_R4:
> + case INT_SET_MASK_R1:
> + case INT_SET_MASK_R2:
> + case INT_SET_MASK_R3:
> + case INT_SET_MASK_R4:
> + case INT_CLEAR_MASK_R1:
> + case INT_CLEAR_MASK_R2:
> + case INT_CLEAR_MASK_R3:
> + case INT_CLEAR_MASK_R4:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
> +static bool stpmic1_reg_volatile(struct device *dev, unsigned int reg)
> +{
> + switch (reg) {
> + case TURN_ON_SR:
> + case TURN_OFF_SR:
> + case ICC_LDO_TURN_OFF_SR:
> + case ICC_BUCK_TURN_OFF_SR:
> + case RREQ_STATE_SR:
> + case INT_PENDING_R1:
> + case INT_PENDING_R2:
> + case INT_PENDING_R3:
> + case INT_PENDING_R4:
> + case INT_SRC_R1:
> + case INT_SRC_R2:
> + case INT_SRC_R3:
> + case INT_SRC_R4:
> + case WCHDG_CR:
> + return true;
> + default:
> + return false;
> + }
> +}

Can you use ranges for all of these?

> +const struct regmap_config stpmic1_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .cache_type = REGCACHE_RBTREE,
> + .max_register = PMIC_MAX_REGISTER_ADDRESS,
> + .readable_reg = stpmic1_reg_readable,
> + .writeable_reg = stpmic1_reg_writeable,
> + .volatile_reg = stpmic1_reg_volatile,
> +};
> +
> +static const struct regmap_irq stpmic1_irqs[] = {
> + [IT_PONKEY_F] = { .mask = 0x01 },
> + [IT_PONKEY_R] = { .mask = 0x02 },
> + [IT_WAKEUP_F] = { .mask = 0x04 },
> + [IT_WAKEUP_R] = { .mask = 0x08 },
> + [IT_VBUS_OTG_F] = { .mask = 0x10 },
> + [IT_VBUS_OTG_R] = { .mask = 0x20 },
> + [IT_SWOUT_F] = { .mask = 0x40 },
> + [IT_SWOUT_R] = { .mask = 0x80 },
> +
> + [IT_CURLIM_BUCK1] = { .reg_offset = 1, .mask = 0x01 },
> + [IT_CURLIM_BUCK2] = { .reg_offset = 1, .mask = 0x02 },
> + [IT_CURLIM_BUCK3] = { .reg_offset = 1, .mask = 0x04 },
> + [IT_CURLIM_BUCK4] = { .reg_offset = 1, .mask = 0x08 },
> + [IT_OCP_OTG] = { .reg_offset = 1, .mask = 0x10 },
> + [IT_OCP_SWOUT] = { .reg_offset = 1, .mask = 0x20 },
> + [IT_OCP_BOOST] = { .reg_offset = 1, .mask = 0x40 },
> + [IT_OVP_BOOST] = { .reg_offset = 1, .mask = 0x80 },
> +
> + [IT_CURLIM_LDO1] = { .reg_offset = 2, .mask = 0x01 },
> + [IT_CURLIM_LDO2] = { .reg_offset = 2, .mask = 0x02 },
> + [IT_CURLIM_LDO3] = { .reg_offset = 2, .mask = 0x04 },
> + [IT_CURLIM_LDO4] = { .reg_offset = 2, .mask = 0x08 },
> + [IT_CURLIM_LDO5] = { .reg_offset = 2, .mask = 0x10 },
> + [IT_CURLIM_LDO6] = { .reg_offset = 2, .mask = 0x20 },
> + [IT_SHORT_SWOTG] = { .reg_offset = 2, .mask = 0x40 },
> + [IT_SHORT_SWOUT] = { .reg_offset = 2, .mask = 0x80 },
> +
> + [IT_TWARN_F] = { .reg_offset = 3, .mask = 0x01 },
> + [IT_TWARN_R] = { .reg_offset = 3, .mask = 0x02 },
> + [IT_VINLOW_F] = { .reg_offset = 3, .mask = 0x04 },
> + [IT_VINLOW_R] = { .reg_offset = 3, .mask = 0x08 },
> + [IT_SWIN_F] = { .reg_offset = 3, .mask = 0x40 },
> + [IT_SWIN_R] = { .reg_offset = 3, .mask = 0x80 },
> +};

There should be a MACRO for doing this.

If there isn't, you should author one and put it in the Regmap header.

> +static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
> + .name = "pmic_irq",
> + .status_base = INT_PENDING_R1,
> + .mask_base = INT_CLEAR_MASK_R1,
> + .unmask_base = INT_SET_MASK_R1,
> + .ack_base = INT_CLEAR_R1,
> + .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
> + .irqs = stpmic1_irqs,
> + .num_irqs = ARRAY_SIZE(stpmic1_irqs),
> +};
> +
> +static int stpmic1_probe(struct i2c_client *i2c,
> + const struct i2c_device_id *id)
> +{
> + struct stpmic1 *ddata;
> + struct device *dev = &i2c->dev;
> + int ret;
> + struct device_node *np = dev->of_node;
> + u32 reg;
> +
> + ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
> + if (!ddata)
> + return -ENOMEM;
> +
> + i2c_set_clientdata(i2c, ddata);
> + ddata->dev = dev;
> +
> + ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
> + if (IS_ERR(ddata->regmap))
> + return PTR_ERR(ddata->regmap);
> +
> + ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
> + if (ddata->irq < 0) {
> + dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
> + return ddata->irq;
> + }
> +
> + if (!of_property_read_u32(np, "st,main-control-register", &reg)) {

I'm still waiting on feedback from Rob as to whether this is
acceptable. I suggest that it isn't.

> + ret = regmap_update_bits(ddata->regmap,
> + SWOFF_PWRCTRL_CR,
> + PWRCTRL_POLARITY_HIGH |
> + PWRCTRL_PIN_VALID |
> + RESTART_REQUEST_ENABLED,
> + reg);
> + if (ret) {
> + dev_err(dev,
> + "Failed to update main control register: %d\n",
> + ret);
> + return ret;
> + }
> + }
> +
> + /* Read Version ID */
> + ret = regmap_read(ddata->regmap, VERSION_SR, &reg);
> + if (ret) {
> + dev_err(dev, "Unable to read pmic version\n");

"PMIC"

> + return ret;
> + }
> + dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);

[...]

--
Lee Jones [李琼斯]
Linaro Services Technical Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

\
 
 \ /
  Last update: 2018-10-25 13:23    [W:0.146 / U:5.940 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site