lkml.org 
[lkml]   [2018]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 4/6] net/ncsi: Don't mark configured channels inactive
Date
The concepts of a channel being 'active' and it having link are slightly
muddled in the NCSI driver. Tweak this slightly so that
NCSI_CHANNEL_ACTIVE represents a channel that has been configured and
enabled, and NCSI_CHANNEL_INACTIVE represents a de-configured channel.
This distinction is important because a channel can be 'active' but have
its link down; in this case the channel may still need to be configured
so that it may receive AEN link-state-change packets.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
---
net/ncsi/ncsi-aen.c | 17 +++++++++++------
net/ncsi/ncsi-manage.c | 3 +--
2 files changed, 12 insertions(+), 8 deletions(-)

diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
index 65f47a648be3..57f77e5d381a 100644
--- a/net/ncsi/ncsi-aen.c
+++ b/net/ncsi/ncsi-aen.c
@@ -57,6 +57,7 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
int state;
unsigned long old_data, data;
unsigned long flags;
+ bool had_link, has_link;

/* Find the NCSI channel */
ncsi_find_package_and_channel(ndp, h->common.channel, NULL, &nc);
@@ -73,6 +74,9 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
ncm->data[2] = data;
ncm->data[4] = ntohl(lsc->oem_status);

+ had_link = !!(old_data & 0x1);
+ has_link = !!(data & 0x1);
+
netdev_dbg(ndp->ndev.dev, "NCSI: LSC AEN - channel %u state %s\n",
nc->id, data & 0x1 ? "up" : "down");

@@ -80,15 +84,16 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
state = nc->state;
spin_unlock_irqrestore(&nc->lock, flags);

- if (!((old_data ^ data) & 0x1) || chained)
- return 0;
- if (!(state == NCSI_CHANNEL_INACTIVE && (data & 0x1)) &&
- !(state == NCSI_CHANNEL_ACTIVE && !(data & 0x1)))
+ if (state == NCSI_CHANNEL_INACTIVE)
+ netdev_warn(ndp->ndev.dev,
+ "NCSI: Inactive channel %u received AEN!\n",
+ nc->id);
+
+ if ((had_link == has_link) || chained)
return 0;

- if (state == NCSI_CHANNEL_ACTIVE)
+ if (had_link)
ndp->flags |= NCSI_DEV_RESHUFFLE;
-
ncsi_stop_channel_monitor(nc);
spin_lock_irqsave(&ndp->lock, flags);
list_add_tail_rcu(&nc->link, &ndp->channel_queue);
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 013437b42e94..014321ad31d3 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -916,12 +916,11 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
break;
}

+ nc->state = NCSI_CHANNEL_ACTIVE;
if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) {
hot_nc = nc;
- nc->state = NCSI_CHANNEL_ACTIVE;
} else {
hot_nc = NULL;
- nc->state = NCSI_CHANNEL_INACTIVE;
netdev_dbg(ndp->ndev.dev,
"NCSI: channel %u link down after config\n",
nc->id);
--
2.19.1
\
 
 \ /
  Last update: 2018-10-23 23:53    [W:0.096 / U:11.432 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site