lkml.org 
[lkml]   [2018]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: i.MX6 MIPI-CSI2 OV5640 Camera testing on Mainline Linux
On Wed, Oct 24, 2018 at 9:08 AM jacopo mondi <jacopo@jmondi.org> wrote:
>
> Hi Adam,
>
> On Wed, Oct 24, 2018 at 08:53:41AM -0500, Adam Ford wrote:
> > On Tue, Oct 23, 2018 at 6:03 PM jacopo mondi <jacopo@jmondi.org> wrote:
> > >
> > > Hi Adam,
> > >
> > > On Tue, Oct 23, 2018 at 12:54:12PM -0500, Adam Ford wrote:
> > > > On Tue, Oct 23, 2018 at 12:39 PM Steve Longerbeam
> > > > <steve_longerbeam@mentor.com> wrote:
> > > > >
> > > > >
> > > > > On 10/23/18 10:34 AM, Adam Ford wrote:
> > > > > > On Tue, Oct 23, 2018 at 11:36 AM Steve Longerbeam
> > > > > > <steve_longerbeam@mentor.com> wrote:
> > > > > >> Hi Adam,
> > > > > >>
> > > > > >> On 10/23/18 8:19 AM, Adam Ford wrote:
> > > > > >>> On Mon, Oct 22, 2018 at 7:40 AM Fabio Estevam <festevam@gmail.com> wrote:
> > > > > >>>> Hi Adam,
> > > > > >>>>
> > > > > >>>> On Mon, Oct 22, 2018 at 9:37 AM Adam Ford <aford173@gmail.com> wrote:
> > > > > >>>>
> > > > > >>>>> Thank you! This tutorial web site is exactly what I need. The
> > > > > >>>>> documentation page in Linux touched on the media-ctl links, but it
> > > > > >>>>> didn't explain the syntax or the mapping. This graphical
> > > > > >>>>> interpretation really helps it make more sense.
> > > > > >>>> Is capturing working well on your i.MX6 board now?
> > > > > >>> Fabio,
> > > > > >>>
> > > > > >>> Unfortunately, no. I built the rootfs based on Jagan's instructions
> > > > > >>> at https://openedev.amarulasolutions.com/display/ODWIKI/i.CoreM6+1.5
> > > > > >>>
> > > > > >>> I tried building both the 4.15-RC6 kernel, a 4.19 kernel and a 4.14 LTS kernel.
> > > > > >>>
> > > > > >>> Using the suggested method of generating the graphical display of the
> > > > > >>> pipeline options, I am able to enable various pipeline options
> > > > > >>> connecting different /dev/videoX options tot he camera. I have tried
> > > > > >>> both the suggested method above as well as the instructions found in
> > > > > >>> Documentation/media/v4l-drivers/imx.rst for their respective kernels,
> > > > > >>> and I have tried multiple options to capture through
> > > > > >>> ipu1_csi1_capture, ipu2_csi1_capture, and ip1_ic_prepenc capture, and
> > > > > >>> all yield a broken pipe.
> > > > > >>>
> > > > > >>> libv4l2: error turning on stream: Broken pipe
> > > > > >>> ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could
> > > > > >>> not read from resource.
> > > > > >>> Additional debug info:
> > > > > >>> gstv4l2bufferpool.c(1064): gst_v4l2_buffer_pool_poll ():
> > > > > >>> /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
> > > > > >>> poll error 1: Broken pipe (32)
> > > > > >>>
> > > > > >>> I can hear the camera click when I start gstreamer and click again
> > > > > >>> when it stops trying to stream.
> > > > > >>>
> > > > > >>> dmesg indicates a broken pipe as well..
> > > > > >>>
> > > > > >>> [ 2419.851502] ipu2_csi1: pipeline start failed with -32
> > > > > >>>
> > > > > >>> might you have any suggestions?
> > > > > >>
> > > > > >> This -EPIPE error might mean you have a mis-match of resolution, pixel
> > > > > >> format, or field type between one of the source->sink pad links. You can
> > > > > >> find out which pads have a mis-match by enabling dynamic debug in the
> > > > > >> kernel function __media_pipeline_start.
> > > > > > Following Jagan's suggestion, I tried to make sure all the resolution
> > > > > > and pixel formats were set the same between each source and sink.
> > > > > >
> > > > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY2X8/640x480
> > > > > > field:none]"
> > > > > > media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/640x480 field:none]"
> > > > > >
> > > > > >> Also make sure you are attempting to stream from the correct /dev/videoN.
> > > > > > I have graphically plotted the pipeline using media-ctl --print-dot
> > > > > > and I can see the proper video is routed, but your dynamic debug
> > > > > > suggestion yielded something:
> > > > > >
> > > > > > imx-media capture-subsystem: link validation failed for 'ov5640
> > > > > > 2-0010':0 -> 'imx6-mipi-csi2':0, error -32
> > > > >
> > > > >
> > > > > It's what I expected, you have a format mismatch between those pads.
> > > >
> > > > Is the mismatch something I am doing wrong with:
> > > >
> > > > media-ctl --set-v4l2 "'ov5640 2-0010':0[fmt:UYVY2X8/640x480 field:none]"
> > > > media-ctl --set-v4l2 "'imx6-mipi-csi2':2[fmt:UYVY2X8/640x480 field:none]"
> > > >
> > >
> > > Could you try to verify the actual format configured on the sensor?
> > > (media-ctl --get-v4l2 "'ov5640 2-0010':0").
> > >
> > > Depending on the driver version you are running, you might be affected
> > > by different regressions.
> > >
> > > > or is there something else I need to do? I just used Jagan's suggestion.
> > >
> > > I suggest you to update the driver version to the last one available
> > > in the media-tree master, or at least try to backport the following
> > > commit:
> > > fb98e29 media: ov5640: fix mode change regression
> > >
> > > If it turns out the format and mode configured on the sensor do not
> > > match the one you want.
> > >
> > > Thanks
> >
> > That got me past one hurdle. Wtih your help, I was able to confirm
> > the mis-match of the modes between the sensor and the csi1 source. I
> > applied the patch as you suggested, but now I get a new error.
> >
> > [ 295.294370] imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000230
> > [ 295.300681] ipu1_csi0: pipeline start failed with -110
> >
> >
>
> Here you go:
> bad1774 media: ov5640: Fix timings setup code
> aa4bb8b media: ov5640: Re-work MIPI startup sequence
>
> Please update your ov5640 driver to the last version available on
> linux-media master repository. There have been a looot of developments
> and fixes recently (and I would be happy to know if they have helped
> you)
>
> > I am going to go through various patches to the imx framework and
> > ov5640 driver to see if I can find the solution, but if you have
> > suggestions as to which fixes are appropriate, I'll test those. If I
>
> Just get what's on linux-media master tree.
>
> > can get this working, would it make sense for me to submit some
> > requests with kernel-stable to backport some of these commits to 4.19
> > and if applicable, 4.14 too?
>
> Sure it will (even if I'm not familiar with the procedure used to tag
> patches to be applied to stable. I would just apply everything that's
> on the latest media tree)
>
> Keep us posted!

Thank you everyone for your help. I pulled the linux-media master and
built it, and it works perfectly from what I can tell. I'll go through
the patch list and see what's back-port-able to 4.19. I noticed that
just copying the ov5640.c driver breaks the build on 4.19.0, so I'm
going to focus on just patches labeled 'fix' on both the ov5640 for
now.

I appreciate everyone's help, and Iearned a lot about the v4l system
in the process.

adam

> j
> >
> > adam
> > > j
> > >
> > > > adam
> > > > >
> > > > > Steve
> > > > >
> > > > >
> > > > > >
> > > > > > I am assume this means the interface between the camera and the csi2
> > > > > > isn't working. I am going to double check the power rails and the
> > > > > > clocks. i can hear it click when activated and deactivated, so
> > > > > > something is happening.
> > > > > >
> > > > > > adam
> > > > > >
> > > > > >> Steve
> > > > > >>

\
 
 \ /
  Last update: 2018-10-24 16:18    [W:0.094 / U:45.184 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site