lkml.org 
[lkml]   [2018]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 2/3] clk: meson: add DT documentation for emmc clock controller
From
Date
On Thu, 2018-10-18 at 13:07 +0800, Jianxin Pan wrote:
> From: Yixun Lan <yixun.lan@amlogic.com>
>
> Document the MMC sub clock controller driver, the potential consumer
> of this driver is MMC or NAND. Also add four clock bindings IDs which
> provided by this driver.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Signed-off-by: Yixun Lan <yixun.lan@amlogic.com>
> Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
> ---
> .../devicetree/bindings/clock/amlogic,mmc-clkc.txt | 31 ++++++++++++++++++++++
> include/dt-bindings/clock/amlogic,mmc-clkc.h | 17 ++++++++++++
> 2 files changed, 48 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> create mode 100644 include/dt-bindings/clock/amlogic,mmc-clkc.h
>
> diff --git a/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> new file mode 100644
> index 0000000..9e6d343
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/amlogic,mmc-clkc.txt
> @@ -0,0 +1,31 @@
> +* Amlogic MMC Sub Clock Controller Driver
> +
> +The Amlogic MMC clock controller generates and supplies clock to support
> +MMC and NAND controller
> +
> +Required Properties:
> +
> +- compatible: should be:
> + "amlogic,gx-mmc-clkc"
> + "amlogic,axg-mmc-clkc"
> +
> +- #clock-cells: should be 1.
> +- clocks: phandles to clocks corresponding to the clock-names property
> +- clock-names: list of parent clock names
> + - "clkin0", "clkin1"
> +
> +Parent node should have the following properties :
> +- compatible: "amlogic,axg-mmc-clkc", "syscon".
> +- reg: base address and size of the MMC control register space.

I get why Stephen is confused by your description, I am too. The example
contradict the documentation.

The documentation above says that the parent node should be a syscon with the
mmc register space.

But your example shows this in the node itself.

> +
> +Example: Clock controller node:
> +
> +sd_mmc_c_clkc: clock-controller@7000 {
> + compatible = "amlogic,axg-mmc-clkc", "syscon";
> + reg = <0x0 0x7000 0x0 0x4>;
> + #clock-cells = <1>;
> +
> + clock-names = "clkin0", "clkin1";
> + clocks = <&clkc CLKID_SD_MMC_C_CLK0>,
> + <&clkc CLKID_FCLK_DIV2>;
> +};
> diff --git a/include/dt-bindings/clock/amlogic,mmc-clkc.h b/include/dt-bindings/clock/amlogic,mmc-clkc.h
> new file mode 100644
> index 0000000..162b949
> --- /dev/null
> +++ b/include/dt-bindings/clock/amlogic,mmc-clkc.h
> @@ -0,0 +1,17 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
> +/*
> + * Meson MMC sub clock tree IDs
> + *
> + * Copyright (c) 2018 Amlogic, Inc. All rights reserved.
> + * Author: Yixun Lan <yixun.lan@amlogic.com>
> + */
> +
> +#ifndef __MMC_CLKC_H
> +#define __MMC_CLKC_H
> +
> +#define CLKID_MMC_DIV 1
> +#define CLKID_MMC_PHASE_CORE 2
> +#define CLKID_MMC_PHASE_TX 3
> +#define CLKID_MMC_PHASE_RX 4
> +
> +#endif


\
 
 \ /
  Last update: 2018-10-24 10:59    [W:0.165 / U:101.472 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site