lkml.org 
[lkml]   [2018]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v1 1/2] drm: Add missing flags for pixel clock & data enable
From
Date
Am Mittwoch, den 24.10.2018, 10:16 +0200 schrieb Daniel Vetter:
> On Tue, Oct 23, 2018 at 04:50:19PM +0200, Benjamin Gaignard wrote:
> > Le lun. 15 oct. 2018 à 13:15, Benjamin Gaignard
> > <benjamin.gaignard@linaro.org> a écrit :
> > >
> > > Le lun. 24 sept. 2018 à 13:59, Yannick Fertré <yannick.fertre@st.com> a écrit :
> > > >
> > > > Add missing flags for pixel clock & data enable polarities.
> > > > These flags are similar to other synchronization signals (hsync, vsync...).
> > > >
> > > > Signed-off-by: Yannick Fertré <yannick.fertre@st.com>
> > >
> > > Reviewed-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
> >
> > Dave or Daniel could you give us your PoV on this patch ?
>
> Does it work? Iirc we had some userspace chocking on new mode flags, and
> needed explicit opt-in. If that looks good (check weston, -modesetting and
> drm_hwc, that should have you covered I hope) then has my ack.

What's the use of exposing those to userspace? There are a number of
drivers that already have to deal with this and they are totally fine
with keeping this information internal to the driver.

For reference see include/video/display_timing.h, specifically the enum
display_flags.

Regards,
Lucas

> -Daniel
>
> > Thanks
> >
> > >
> > > > ---
> > > > drivers/gpu/drm/drm_modes.c | 19 ++++++++++++++++++-
> > > > include/uapi/drm/drm_mode.h | 6 ++++++
> > > > 2 files changed, 24 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
> > > > index 02db9ac..596f8b3 100644
> > > > --- a/drivers/gpu/drm/drm_modes.c
> > > > +++ b/drivers/gpu/drm/drm_modes.c
> > > > @@ -130,7 +130,7 @@ EXPORT_SYMBOL(drm_mode_probed_add);
> > > > * according to the hdisplay, vdisplay, vrefresh.
> > > > * It is based from the VESA(TM) Coordinated Video Timing Generator by
> > > > * Graham Loveridge April 9, 2003 available at
> > > > - * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> > > > + * http://www.elo.utfsm.cl/~elo212/docs/CVTd6r1.xls
> > > > *
> > > > * And it is copied from xf86CVTmode in xserver/hw/xfree86/modes/xf86cvt.c.
> > > > * What I have done is to translate it by using integer calculation.
> > > > @@ -611,6 +611,15 @@ void drm_display_mode_from_videomode(const struct videomode *vm,
> > > > dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
> > > > if (vm->flags & DISPLAY_FLAGS_DOUBLECLK)
> > > > dmode->flags |= DRM_MODE_FLAG_DBLCLK;
> > > > + if (vm->flags & DISPLAY_FLAGS_PIXDATA_POSEDGE)
> > > > + dmode->flags |= DRM_MODE_FLAG_PPIXCLK;
> > > > + else if (vm->flags & DISPLAY_FLAGS_PIXDATA_NEGEDGE)
> > > > + dmode->flags |= DRM_MODE_FLAG_NPIXCLK;
> > > > + if (vm->flags & DISPLAY_FLAGS_DE_HIGH)
> > > > + dmode->flags |= DRM_MODE_FLAG_PDATAEN;
> > > > + else if (vm->flags & DISPLAY_FLAGS_DE_LOW)
> > > > + dmode->flags |= DRM_MODE_FLAG_NDE;
> > > > +
> > > > drm_mode_set_name(dmode);
> > > > }
> > > > EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);
> > > > @@ -652,6 +661,14 @@ void drm_display_mode_to_videomode(const struct drm_display_mode *dmode,
> > > > vm->flags |= DISPLAY_FLAGS_DOUBLESCAN;
> > > > if (dmode->flags & DRM_MODE_FLAG_DBLCLK)
> > > > vm->flags |= DISPLAY_FLAGS_DOUBLECLK;
> > > > + if (dmode->flags & DRM_MODE_FLAG_PPIXDATA)
> > > > + vm->flags |= DISPLAY_FLAGS_PIXDATA_POSEDGE;
> > > > + else if (dmode->flags & DRM_MODE_FLAG_NPIXDATA)
> > > > + vm->flags |= DISPLAY_FLAGS_PIXDATA_NEGEDGE;
> > > > + if (dmode->flags & DRM_MODE_FLAG_PDE)
> > > > + vm->flags |= DISPLAY_FLAGS_DE_HIGH;
> > > > + else if (dmode->flags & DRM_MODE_FLAG_NDE)
> > > > + vm->flags |= DISPLAY_FLAGS_DE_LOW;
> > > > }
> > > > EXPORT_SYMBOL_GPL(drm_display_mode_to_videomode);
> > > >
> > > > diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h
> > > > index d3e0fe3..b335a17 100644
> > > > --- a/include/uapi/drm/drm_mode.h
> > > > +++ b/include/uapi/drm/drm_mode.h
> > > > @@ -89,6 +89,12 @@ extern "C" {
> > > > #define DRM_MODE_FLAG_3D_TOP_AND_BOTTOM (7<<14)
> > > > #define DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF (8<<14)
> > > >
> > > > +/* flags for polarity clock & data enable polarities */
> > > > +#define DRM_MODE_FLAG_PPIXDATA (1 << 19)
> > > > +#define DRM_MODE_FLAG_NPIXDATA (1 << 20)
> > > > +#define DRM_MODE_FLAG_PDE (1 << 21)
> > > > +#define DRM_MODE_FLAG_NDE (1 << 22)
> > > > +
> > > > /* Picture aspect ratio options */
> > > > #define DRM_MODE_PICTURE_ASPECT_NONE 0
> > > > #define DRM_MODE_PICTURE_ASPECT_4_3 1
> > > > --
> > > > 2.7.4
> > > >
> > > > _______________________________________________
> > > > dri-devel mailing list
> > > > dri-devel@lists.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/dri-devel
> >
> >
> >
> > --
> > Benjamin Gaignard
> >
> > Graphic Study Group
> >
> > Linaro.org │ Open source software for ARM SoCs
> >
> > Follow Linaro: Facebook | Twitter | Blog
>
>

\
 
 \ /
  Last update: 2018-10-24 10:24    [W:0.039 / U:9.280 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site