[lkml]   [2018]   [Oct]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH v2 2/3] dt-bindings: fpga: Add bindings for ZynqMP fpga driver
Add documentation to describe Xilinx ZynqMP fpga driver

Signed-off-by: Nava kishore Manne <>
Changes for v2:
-Removed "----" separators.
Changes for v1:
-Created a Seperate(New) DT binding file as
suggested by Rob.

Changes for RFC-V2:
-Moved pcap node as a child to firwmare
node as suggested by Rob.

.../bindings/fpga/xlnx,zynqmp-pcap-fpga.txt | 13 +++++++++++++
1 file changed, 13 insertions(+)
create mode 100644 Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt

diff --git a/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
new file mode 100644
index 000000000000..1f6f58872311
--- /dev/null
+++ b/Documentation/devicetree/bindings/fpga/xlnx,zynqmp-pcap-fpga.txt
@@ -0,0 +1,13 @@
+Device Tree zynqmp-fpga bindings for the Zynq Ultrascale+ MPSoC controlled
+using ZynqMP SoC firmware interface
+For Bitstream configuration on ZynqMp Soc uses processor configuration
+port(PCAP) to configure the programmable logic(PL) through PS by using
+FW interface.
+Required properties:
+- compatible: should contain "xlnx,zynqmp-pcap-fpga"
+ zynqmp_pcap: pcap {
+ compatible = "xlnx,zynqmp-pcap-fpga";
+ };
 \ /
  Last update: 2018-10-24 09:37    [W:0.050 / U:0.484 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site