lkml.org 
[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 0/15] Add support for OLPC XO 1.75 Embedded Controller
From
Date
On Fri, 2018-10-19 at 16:57 +0300, Andy Shevchenko wrote:
> On Wed, Oct 10, 2018 at 8:23 PM Lubomir Rintel <lkundrak@v3.sk> wrote:
> > Hi.
> >
> > This patchset adds support for the Embedded Controller on an OLPC XO
> > 1.75 machine. OLPC XO 1.75 is a MMP2 based ARM laptop. It plugs into
> > the existing OLPC platform infrastructure, currently used by the x86
> > based models.
> >
> > The EC operates in SPI master mode, meaning the SOC is the SPI slave. It
> > uses extra handshake signal to signal readiness of SOC to accept data
> > from EC and to initiate a transaction if SOC wishes to submit data.
> >
> > The SPI slave support for MMP2 was submitted separately:
> > https://lore.kernel.org/lkml/20181010170936.316862-1-lkundrak@v3.sk/T/#t
> >
> > THe "power: supply: olpc_battery: correct the temperature" patch was
>
> The
>
> > already sent out separately, but I'm including it because the last
> > commit of the set depends on it.
> >
> > Tested to work on an OLPC XO 1.75 and also tested not to break x86
> > support with an OLPC XO 1 machine. I don't have a XO 1.5, but it's
> > unlikely this breaks it when XO 1 works.
> >
> > Thanks in advance for reviews and feedback of any kind.
>
> Thanks for the series.
> I'm about to review the patch 6, otherwise read my comments for the
> rest and consider addressing them.

Thank you very much for your feedback, it is very appreciated.

The XO 1.75 patch set has grown somewhat larger than I'm comfortable
with, so I need some time to digest and address the review. I hope I'll
be able to post a v2 some time after the 4.20 merge window closes and
respond to questions raised in individual patches before that.

>
> > Lubo
> >
>
>

\
 
 \ /
  Last update: 2018-10-23 19:04    [W:0.152 / U:12.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site