lkml.org 
[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/5] arm64: dts: qcom: sdm845: Add UFS DT nodes
Date
Update the device tree bindings for the QMP PHY to properly
specify the registers for dual-lane PHYs. Update the driver to use
those new registers. Add the DT nodes for UFS on SDM845 and MTP.
Finally, fix up the USB3 PHY on SDM845, which also has a dual-lane phy

Changes in v3:
- Removed erroneous fixup for USB UniPro PHY, which is not dual lane (Doug)

Changes in v2:
- Added dt bindings change, corresponding driver fixup, and USB PHY fixup
- Renamed ufsphy to phy (Vivek)
- Removed #clock-cells (Vivek)

Can Guo (1):
arm64: dts: qcom: sdm845: Add UFS nodes for sdm845-mtp

Evan Green (4):
dt-bindings: phy-qcom-qmp: Fix register underspecification
phy: qcom-qmp: Utilize fully-specified DT registers
arm64: dts: qcom: sdm845: add UFS controller
arm64: dts: qcom: sdm845: Add USB PHY lane two

.../devicetree/bindings/phy/qcom-qmp-phy.txt | 73 +++++++++++++++++++---
arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 14 +++++
arch/arm64/boot/dts/qcom/sdm845.dtsi | 71 ++++++++++++++++++++-
drivers/phy/qualcomm/phy-qcom-qmp.c | 51 +++++++++++----
4 files changed, 187 insertions(+), 22 deletions(-)

--
2.16.4

\
 
 \ /
  Last update: 2018-10-22 22:52    [W:0.050 / U:0.332 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site