[lkml]   [2018]   [Oct]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH 6/6] dt-bindings: drm/panel: simple: Innolux TV123WAM is actually P120ZDG-BF1
As far as I can tell the bindings that were added in commit
9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel
bindings") weren't actually for Innolux TV123WAM but were actually for
Innolux P120ZDG-BF1.

As far as I can tell the Innolux TV123WAM isn't a real panel and but
it's a mosh between the TI TV123WAM and the Innolux P120ZDG-BF1.
Let's unmosh.

Here's my evidence:

* Searching for TV123WAM on the Internet turns up a TI panel. While
it's possible that an Innolux panel has the same model number as the
TI Panel, it seems a little doubtful. Looking up the datasheet from
the TI Panel shows that it's 1920 x 1280 and 259.2 mm x 172.8 mm.

* As far as I know, the patch adding the Innolux Panel was supposed to
be for the board that's sitting in front of me as I type this
(support for that board is not yet upstream). On the back of that
panel I see Innolux P120ZDZ-EZ1 rev B1.

* Someone pointed me at a datasheet that's supposed to be for the
panel in front of me (sorry, I can't share the datasheet). That
datasheet has the string "p120zdg-bf1"

* If I search for "P120ZDG-BF1" on the Internet I get hits for panels
that are 2160x1440. They don't have datasheets, but the fact that
the resolution matches is a good sign.

While we doing the rename, also mention that no-hpd can be used with
this panel. See the previous patch in this series ("drm/panel:
simple: Add "no-hpd" delay for Innolux TV123WAM").

Fixes: 9c04400f7ea6 ("dt-bindings: drm/panel: Document Innolux TV123WAM panel bindings")
Signed-off-by: Douglas Anderson <>
Cc: Sandeep Panda <>

.../{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
rename Documentation/devicetree/bindings/display/panel/{innolux,tv123wam.txt => innolux,p120zdg-bf1.txt} (70%)

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
similarity index 70%
rename from Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
rename to Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
index a9b35265fa13..513f03466aba 100644
--- a/Documentation/devicetree/bindings/display/panel/innolux,tv123wam.txt
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p120zdg-bf1.txt
@@ -1,20 +1,22 @@
-Innolux TV123WAM 12.3 inch eDP 2K display panel
+Innolux P120ZDG-BF1 12.02 inch eDP 2K display panel

This binding is compatible with the simple-panel binding, which is specified
in simple-panel.txt in this directory.

Required properties:
-- compatible: should be "innolux,tv123wam"
+- compatible: should be "innolux,p120zdg-bf1"
- power-supply: regulator to provide the supply voltage

Optional properties:
- enable-gpios: GPIO pin to enable or disable the panel
- backlight: phandle of the backlight device attached to the panel
+- no-hpd: If HPD isn't hooked up; add this property.

panel_edp: panel-edp {
- compatible = "innolux,tv123wam";
+ compatible = "innolux,p120zdg-bf1";
enable-gpios = <&msmgpio 31 GPIO_ACTIVE_LOW>;
power-supply = <&pm8916_l2>;
backlight = <&backlight>;
+ no-hpd;
 \ /
  Last update: 2018-10-22 22:49    [W:0.127 / U:3.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site