lkml.org 
[lkml]   [2018]   [Oct]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 3/3] fpga manager: Adding FPGA Manager support for Xilinx zynqmp
Date
Hi Moritz,

Thanks for the quick response...
Please find my response inline...

> -----Original Message-----
> From: Moritz Fischer [mailto:moritz.fischer.private@gmail.com]
> Sent: Saturday, October 20, 2018 2:54 AM
> To: Nava kishore Manne <navam@xilinx.com>
> Cc: Alan Tull <atull@kernel.org>; Rob Herring <robh+dt@kernel.org>; Mark
> Rutland <mark.rutland@arm.com>; Michal Simek <michals@xilinx.com>; Rajan
> Vaja <RAJANV@xilinx.com>; Jolly Shah <JOLLYS@xilinx.com>; linux-
> fpga@vger.kernel.org; Devicetree List <devicetree@vger.kernel.org>; linux-
> arm-kernel <linux-arm-kernel@lists.infradead.org>; Linux Kernel Mailing List
> <linux-kernel@vger.kernel.org>; chinnikishore369@gmail.com
> Subject: Re: [PATCH 3/3] fpga manager: Adding FPGA Manager support for
> Xilinx zynqmp
>
> Hi Nava,
>
> Looks good to me, a couple of nits inline below.
>
> On Fri, Oct 19, 2018 at 1:50 AM Nava kishore Manne
> <nava.manne@xilinx.com> wrote:
> >
> > This patch adds FPGA Manager support for the Xilinx ZynqMp chip.
>
> Isn't it ZynqMP ?

Will fix in the next version.

> >
> > Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
> > ---
> > Changes for v1:
> > -None.
> >
> > Changes for RFC-V2:
> > -Updated the Fpga Mgr registrations call's
> > to 4.18
> >
> > drivers/fpga/Kconfig | 9 +++
> > drivers/fpga/Makefile | 1 +
> > drivers/fpga/zynqmp-fpga.c | 159
> > +++++++++++++++++++++++++++++++++++++
> > 3 files changed, 169 insertions(+)
> > create mode 100644 drivers/fpga/zynqmp-fpga.c
> >
> > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index
> > 1ebcef4bab5b..26ebbcf3d3a3 100644
> > --- a/drivers/fpga/Kconfig
> > +++ b/drivers/fpga/Kconfig
> > @@ -56,6 +56,15 @@ config FPGA_MGR_ZYNQ_FPGA
> > help
> > FPGA manager driver support for Xilinx Zynq FPGAs.
> >
> > +config FPGA_MGR_ZYNQMP_FPGA
> > + tristate "Xilinx Zynqmp FPGA"
> > + depends on ARCH_ZYNQMP || COMPILE_TEST
> > + help
> > + FPGA manager driver support for Xilinx ZynqMP FPGAs.
> > + This driver uses processor configuration port(PCAP)
> This driver uses *the* processor configuration port.
>

Will fix in the next version.

> > + to configure the programmable logic(PL) through PS
> > + on ZynqMP SoC.
> > +
> > config FPGA_MGR_XILINX_SPI
> > tristate "Xilinx Configuration over Slave Serial (SPI)"
> > depends on SPI
> > diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index
> > 7a2d73ba7122..3488ebbaee46 100644
> > --- a/drivers/fpga/Makefile
> > +++ b/drivers/fpga/Makefile
> > @@ -16,6 +16,7 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10) +=
> socfpga-a10.o
> > obj-$(CONFIG_FPGA_MGR_TS73XX) += ts73xx-fpga.o
> > obj-$(CONFIG_FPGA_MGR_XILINX_SPI) += xilinx-spi.o
> > obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA) += zynq-fpga.o
> > +obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA) += zynqmp-fpga.o
> > obj-$(CONFIG_ALTERA_PR_IP_CORE) += altera-pr-ip-core.o
> > obj-$(CONFIG_ALTERA_PR_IP_CORE_PLAT) += altera-pr-ip-core-plat.o
> >
> > diff --git a/drivers/fpga/zynqmp-fpga.c b/drivers/fpga/zynqmp-fpga.c
> > new file mode 100644 index 000000000000..2760d7e3872a
> > --- /dev/null
> > +++ b/drivers/fpga/zynqmp-fpga.c
> > @@ -0,0 +1,159 @@
> > +// SPDX-License-Identifier: GPL-2.0+
> > +/*
> > + * Copyright (C) 2018 Xilinx, Inc.
> > + */
> > +
> > +#include <linux/dma-mapping.h>
> > +#include <linux/fpga/fpga-mgr.h>
> > +#include <linux/io.h>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/of_address.h>
> > +#include <linux/string.h>
> > +#include <linux/firmware/xlnx-zynqmp.h>
> > +
> > +/* Constant Definitions */
> > +#define IXR_FPGA_DONE_MASK 0X00000008U
> > +
> > +/**
> > + * struct zynqmp_fpga_priv - Private data structure
> > + * @dev: Device data structure
> > + * @flags: flags which is used to identify the bitfile type
> > + */
> > +struct zynqmp_fpga_priv {
> > + struct device *dev;
> > + u32 flags;
> > +};
> > +
> > +static int zynqmp_fpga_ops_write_init(struct fpga_manager *mgr,
> > + struct fpga_image_info *info,
> > + const char *buf, size_t size) {
> > + struct zynqmp_fpga_priv *priv;
> > +
> > + priv = mgr->priv;
> > + priv->flags = info->flags;
> > +
> > + return 0;
> > +}
> > +
> > +static int zynqmp_fpga_ops_write(struct fpga_manager *mgr,
> > + const char *buf, size_t size) {
> > + struct zynqmp_fpga_priv *priv;
> > + char *kbuf;
> > + dma_addr_t dma_addr;
> > + int ret;
> > + const struct zynqmp_eemi_ops *eemi_ops =
> > +zynqmp_pm_get_eemi_ops();
>
> Reverse xmas-tree please, i.e. long lines first.
>
Will fix in the next version.

> > +
> > + if (!eemi_ops || !eemi_ops->fpga_load)
> > + return -ENXIO;
> > +
> > + priv = mgr->priv;
> > +
> > + kbuf = dma_alloc_coherent(priv->dev, size, &dma_addr, GFP_KERNEL);
> > + if (!kbuf)
> > + return -ENOMEM;
> > +
> > + memcpy(kbuf, buf, size);
> > +
> > + wmb(); /* ensure all writes are done before initiate FW call
> > + */
> > +
> > + ret = eemi_ops->fpga_load(dma_addr, size, priv->flags);
> > +
> > + dma_free_coherent(priv->dev, size, kbuf, dma_addr);
> > +
> > + return ret;
> > +}
> > +
> > +static int zynqmp_fpga_ops_write_complete(struct fpga_manager *mgr,
> > + struct fpga_image_info
> > +*info) {
> > + return 0;
> > +}
> > +
> > +static enum fpga_mgr_states zynqmp_fpga_ops_state(struct fpga_manager
> > +*mgr) {
> > + u32 status;
> > + const struct zynqmp_eemi_ops *eemi_ops =
> > +zynqmp_pm_get_eemi_ops();
>
> Same here, split it up if necessary.

Will fix in the next version

> > +
> > + if (!eemi_ops || !eemi_ops->fpga_get_status)
> > + return FPGA_MGR_STATE_UNKNOWN;
> > +
> > + eemi_ops->fpga_get_status(&status);
> > + if (status & IXR_FPGA_DONE_MASK)
> > + return FPGA_MGR_STATE_OPERATING;
> > +
> > + return FPGA_MGR_STATE_UNKNOWN; }
> > +
> > +static const struct fpga_manager_ops zynqmp_fpga_ops = {
> > + .state = zynqmp_fpga_ops_state,
> > + .write_init = zynqmp_fpga_ops_write_init,
> > + .write = zynqmp_fpga_ops_write,
> > + .write_complete = zynqmp_fpga_ops_write_complete, };
> > +
> > +static int zynqmp_fpga_probe(struct platform_device *pdev) {
> > + struct device *dev = &pdev->dev;
> > + struct zynqmp_fpga_priv *priv;
> > + struct fpga_manager *mgr;
> > + int err, ret;
> > +
> > + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > +
> > + priv->dev = dev;
> > + ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44));
> > + if (ret < 0)
> > + dev_err(dev, "no usable DMA configuration");
>
> Do you wanna do something about this error if it happens? Return 'ret' maybe?

Will fix in the next version.

> > +
> > + mgr = fpga_mgr_create(dev, "Xilinx ZynqMP FPGA Manager",
> > + &zynqmp_fpga_ops, priv);
> > + if (!mgr)
> > + return -ENOMEM;
> > +
> > + platform_set_drvdata(pdev, mgr);
> > +
> > + err = fpga_mgr_register(mgr);
> > + if (err) {
> > + dev_err(dev, "unable to register FPGA manager");
> > + fpga_mgr_free(mgr);
> > + return err;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static int zynqmp_fpga_remove(struct platform_device *pdev) {
> > + struct fpga_manager *mgr = platform_get_drvdata(pdev);
> > +
> > + fpga_mgr_unregister(mgr);
> > +
> > + return 0;
> > +}
> > +
> > +static const struct of_device_id zynqmp_fpga_of_match[] = {
> > + { .compatible = "xlnx,zynqmp-pcap-fpga", },
> > + {},
> > +};
> > +
> > +MODULE_DEVICE_TABLE(of, zynqmp_fpga_of_match);
> > +
> > +static struct platform_driver zynqmp_fpga_driver = {
> > + .probe = zynqmp_fpga_probe,
> > + .remove = zynqmp_fpga_remove,
> > + .driver = {
> > + .name = "zynqmp_fpga_manager",
> > + .of_match_table = of_match_ptr(zynqmp_fpga_of_match),
> > + },
> > +};
> > +
> > +module_platform_driver(zynqmp_fpga_driver);
> > +
> > +MODULE_AUTHOR("Nava kishore Manne <navam@xilinx.com>");
> > +MODULE_DESCRIPTION("Xilinx ZynqMp FPGA Manager");
> > +MODULE_LICENSE("GPL");
> > --
> > 2.18.0
> >
>
> Thanks,
>
> Moritz
\
 
 \ /
  Last update: 2018-10-22 11:52    [W:2.182 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site