lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] mmc: sdhci-pci: Try "cd" for card-detect lookup before using NULL
On Fri, Oct 19, 2018 at 12:53 AM Rajat Jain <rajatja@google.com> wrote:
>
> Problem:
>
> The card detect IRQ does not work with modern BIOS (that want
> to use DSD to provide the card detect GPIO to the driver).
>
> Details:
>

> (Discussion: https://lkml.org/lkml/2018/9/25/1113)

We have a Link tag for such references.

> The mmc core provides the mmc_gpiod_request_cd() API to let host drivers
> request the gpio descriptor for the "card detect" (or carrier detect?) pin.

card detect is a right term.

> This pin is specified in the ACPI for the SDHC device:
>
> * Either as a resource using _CRS. This is a method used by legacy BIOS.
> (The driver needs to tell which resource index).
>
> * Or as a named property ("cd-gpio") in DSD (which may internally point

cd-gpios (gpio suffix is a legacy).

> to an entry in _CRS). This way, the driver can lookup using a string.
> This is what modern BIOS prefer to use.
>
> This API finally results in a call to the following code:
>
> struct gpio_desc *acpi_find_gpio(..., const char *con_id,...)
> {
> ...
> /* Lookup gpio (using "<con_id>-gpio") in the _DSD */
> ...
> if (!acpi_can_fallback_to_crs(adev, con_id))
> return ERR_PTR(-ENOENT);
> ...
> /* Falling back to _CRS is allowed, Lookup gpio in the _CRS */
> ...
> }
>
> Note that this means that if the ACPI has _DSD properties, the kernel
> will never use _CRS for the lookup (Because acpi_can_fallback_to_crs()
> will always be false for any device hat has _DSD entries).
>
> The SDHCI driver is thus currently broken on a modern BIOS

> (even if
> BIOS provides both _CRS and DSD entries, either of which could be used for

_DSD

> a successful lookup).

This is incorrect. _DSD for GPIOs without any accompanying _CRS
doesn't make any sense.

> Ironically, none of these will be used for the
> lookup currently because:
>
> * Since the con_id is NULL, acpi_find_gpio() does not find a matching
> entry in DSDT. (The DSDT entry has the property name = "cd-gpio")

cd-gpios

>
> * Because ACPI contains DSDT entries, thus acpi_can_fallback_to_crs()
> returns false (because device properties have been populated from
> DSD), thus the _CRS is never used for the lookup.

_DSD

>
> Fix:
>
> Try "cd" for lookup in the _DSD before falling back to using NULL so
> as to try looking up in the _CRS.
>
> I've tested this patch successfully with both Legacy BIOS (that
> provide only _CRS method) as well as modern BIOS (that provide both
> _CRS and DSD). Also the use of "cd" also appears to be farly consistent

_DSD
fairly

> across other users of this API (other MMC host controller drivers).

> if (slot->cd_idx >= 0) {
> - ret = mmc_gpiod_request_cd(host->mmc, NULL, slot->cd_idx,
> + ret = mmc_gpiod_request_cd(host->mmc, "cd", slot->cd_idx,
> slot->cd_override_level, 0, NULL);

Yes.

> + if (ret && ret != -EPROBE_DEFER)
> + ret = mmc_gpiod_request_cd(host->mmc, NULL,
> + slot->cd_idx,
> + slot->cd_override_level,
> + 0, NULL);

And no. Instead of this part you need to provide an ACPI GPIO mapping table.

See examples, like
net/rfkill/rfkill-gpio.c

(look for acpi_rfkill_default_gpios)

> if (ret == -EPROBE_DEFER)
> goto remove;

--
With Best Regards,
Andy Shevchenko

\
 
 \ /
  Last update: 2018-10-19 11:14    [W:0.082 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site