lkml.org 
[lkml]   [2018]   [Oct]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] firmware: xilinx: Add fpga API's
Date
This Patch Adds fpga API's to support the Bitstream loading
by using firmware interface.

Signed-off-by: Nava kishore Manne <nava.manne@xilinx.com>
---
Changes for v1:
-None.

Changes for RFC-V2:
-New Patch.

drivers/firmware/xilinx/zynqmp.c | 46 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 4 +++
2 files changed, 50 insertions(+)

diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 84b3fd2eca8b..38a1ab1be03b 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -428,6 +428,50 @@ static int zynqmp_pm_clock_getparent(u32 clock_id, u32 *parent_id)
return ret;
}

+/**
+ * zynqmp_pm_fpga_load - Perform the fpga load
+ * @address: Address to write to
+ * @size: pl bitstream size
+ * @flags:
+ * BIT(0) - Bit-stream type.
+ * 0 - Full Bit-stream.
+ * 1 - Partial Bit-stream.
+ *
+ * This function provides access to pmufw. To transfer
+ * the required bitstream into PL.
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_load(const u64 address, const u32 size,
+ const u32 flags)
+{
+ return zynqmp_pm_invoke_fn(PM_FPGA_LOAD, lower_32_bits(address),
+ upper_32_bits(address), size, flags, NULL);
+}
+
+/**
+ * zynqmp_pm_fpga_get_status - Read value from PCAP status register
+ * @value: Value to read
+ *
+ * This function provides access to the xilfpga library to get
+ * the PCAP status
+ *
+ * Return: Returns status, either success or error+reason
+ */
+static int zynqmp_pm_fpga_get_status(u32 *value)
+{
+ u32 ret_payload[PAYLOAD_ARG_CNT];
+ int ret;
+
+ if (!value)
+ return -EINVAL;
+
+ ret = zynqmp_pm_invoke_fn(PM_FPGA_GET_STATUS, 0, 0, 0, 0, ret_payload);
+ *value = ret_payload[1];
+
+ return ret;
+}
+
static const struct zynqmp_eemi_ops eemi_ops = {
.get_api_version = zynqmp_pm_get_api_version,
.query_data = zynqmp_pm_query_data,
@@ -440,6 +484,8 @@ static const struct zynqmp_eemi_ops eemi_ops = {
.clock_getrate = zynqmp_pm_clock_getrate,
.clock_setparent = zynqmp_pm_clock_setparent,
.clock_getparent = zynqmp_pm_clock_getparent,
+ .fpga_load = zynqmp_pm_fpga_load,
+ .fpga_get_status = zynqmp_pm_fpga_get_status,
};

/**
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 015e130431e6..b24400ee630a 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -34,6 +34,8 @@

enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FPGA_LOAD = 22,
+ PM_FPGA_GET_STATUS,
PM_QUERY_DATA = 35,
PM_CLOCK_ENABLE,
PM_CLOCK_DISABLE,
@@ -89,6 +91,8 @@ struct zynqmp_pm_query_data {

struct zynqmp_eemi_ops {
int (*get_api_version)(u32 *version);
+ int (*fpga_load)(const u64 address, const u32 size, const u32 flags);
+ int (*fpga_get_status)(u32 *value);
int (*query_data)(struct zynqmp_pm_query_data qdata, u32 *out);
int (*clock_enable)(u32 clock_id);
int (*clock_disable)(u32 clock_id);
--
2.18.0
\
 
 \ /
  Last update: 2018-10-19 10:50    [W:2.129 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site