lkml.org 
[lkml]   [2018]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next] net: ethernet: ti: cpsw: don't flush mcast entries while switch promisc mode
Date
No need now to flush mcast entries in switch mode while toggling to
promiscuous mode. It's not needed as vlan reg_mcast = ALL_PORTS
and mcast/vlan ports = ALL_PORTS, the same happening for vlan
unreg_mcast, it's set to ALL_PORT_MASK just after calling promisc
mode routine by calling set allmulti. I suppose main reason to flush
them is to use unreg_mcast to receive all to host port. Thus, now, all
mcast packets are received anyway and no reason to flush mcast entries
unsafely, as they were synced with __dev_mc_sync() previously and are
not restored. Another way is to _dev_mc_unsync() them, but no need.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org>
---

Based on net-next/master
Tasted on am572x EVM and BBB

drivers/net/ethernet/ti/cpsw.c | 3 ---
1 file changed, 3 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index 226be2a56c1f..0e475020a674 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -638,9 +638,6 @@ static void cpsw_set_promiscious(struct net_device *ndev, bool enable)
} while (time_after(timeout, jiffies));
cpsw_ale_control_set(ale, 0, ALE_AGEOUT, 1);

- /* Clear all mcast from ALE */
- cpsw_ale_flush_multicast(ale, ALE_ALL_PORTS, -1);
-
/* Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
dev_dbg(&ndev->dev, "promiscuity enabled\n");
--
2.17.1
\
 
 \ /
  Last update: 2018-10-18 20:00    [W:0.046 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site