lkml.org 
[lkml]   [2018]   [Oct]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v5 0/3] Stingray thermal driver support
From
Date
All Acked-by: Scott Branden <scott.branden@broadcom.com>

On 2018-10-16 8:11 a.m., Srinath Mannam wrote:
> These patches adds the stingray thermal driver and its
> corresponding DT nodes with documentation.
>
> Changes from v4
> - Addressed Rob Herring comments on DT parameters and
> thermal driver architecture.
> - Removed brcm,max-crit-temp DT parameter
> - Changed driver to thermal sensor registration model.
> - Added trip DT properties.
>
> Changes from v3
> - Addressed Daniel lezcano comments.
> - Elaborated commit description of thermal driver patch.
> - Added brcm,max-crit-temp DT parameter.
>
> Changes from v2:
> - All stingray TMON DT nodes are combine together into single.
> Temperature registers are combined into one mem resource.
> brcm,tmon-mask parameter has available TMONs mask value.
> - All available TMONs are initialized together in single
> instance of driver probe call.
>
> Changes from v1:
> - Fixed auto build sparce warning.
>
> Pramod Kumar (3):
> dt-bindings: thermal: Add binding document for SR thermal
> thermal: broadcom: Add Stingray thermal driver
> arm64: dts: stingray: Add Stingray Thermal DT support.
>
> .../bindings/thermal/brcm,sr-thermal.txt | 105 ++++++++++++++++
> .../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 89 +++++++++++++
> drivers/thermal/Kconfig | 3 +-
> drivers/thermal/broadcom/Kconfig | 9 ++
> drivers/thermal/broadcom/Makefile | 1 +
> drivers/thermal/broadcom/sr-thermal.c | 138 +++++++++++++++++++++
> 6 files changed, 344 insertions(+), 1 deletion(-)
> create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
> create mode 100644 drivers/thermal/broadcom/sr-thermal.c
>

\
 
 \ /
  Last update: 2018-10-18 21:10    [W:1.177 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site