lkml.org 
[lkml]   [2018]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/17] thermal: exynos: enable+check sensor after its setup is finished
Date
Enable sensor after doing chipset specific initialization operation and
check sensor after doing chipset specific control operation.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/thermal/samsung/exynos_tmu.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index 8ec74a62..796a868 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1109,15 +1109,14 @@ static int exynos_tmu_probe(struct platform_device *pdev)
goto err_sclk;
}

- thermal_zone_set_mode(data->tzd, THERMAL_DEVICE_ENABLED);
- thermal_zone_device_check(data->tzd);
-
ret = exynos_tmu_initialize(pdev);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize TMU\n");
goto err_thermal;
}

+ thermal_zone_set_mode(data->tzd, THERMAL_DEVICE_ENABLED);
+
ret = devm_request_irq(&pdev->dev, data->irq, exynos_tmu_irq,
IRQF_TRIGGER_RISING | IRQF_SHARED, dev_name(&pdev->dev), data);
if (ret) {
@@ -1126,6 +1125,9 @@ static int exynos_tmu_probe(struct platform_device *pdev)
}

exynos_tmu_control(pdev, true);
+
+ thermal_zone_device_check(data->tzd);
+
return 0;

err_thermal:
--
1.9.1
\
 
 \ /
  Last update: 2018-10-17 17:55    [W:0.150 / U:2.284 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site