lkml.org 
[lkml]   [2018]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 08/17] thermal: qcom: tsens: enable+check sensor after its setup is finished
Date
Enable+check sensor after setting tmdev->sensor[i].tzd and calling
chipset specific enable operation.

Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
---
drivers/thermal/qcom/tsens.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
index dbd2556..01bff96 100644
--- a/drivers/thermal/qcom/tsens.c
+++ b/drivers/thermal/qcom/tsens.c
@@ -105,13 +105,13 @@ static int tsens_register(struct tsens_device *tmdev)
if (IS_ERR(tzd))
continue;

- thermal_zone_set_mode(tzd, THERMAL_DEVICE_ENABLED);
- thermal_zone_device_check(tzd);
-
tmdev->sensor[i].tzd = tzd;

if (tmdev->ops->enable)
tmdev->ops->enable(tmdev, i);
+
+ thermal_zone_set_mode(tzd, THERMAL_DEVICE_ENABLED);
+ thermal_zone_device_check(tzd);
}
return 0;
}
--
1.9.1
\
 
 \ /
  Last update: 2018-10-17 17:55    [W:0.089 / U:1.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site