lkml.org 
[lkml]   [2018]   [Oct]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/5] hwmon: (ina3221) Return -ENODATA for two alarms attributes
On Tue, Oct 16, 2018 at 06:24:23PM -0700, Nicolin Chen wrote:
> There is nothing critically wrong to read these two attributes
> without having a is_enabled() check at this point. But reading
> the MASK_ENABLE register would clear the CVRF bit according to
> the datasheet. So it'd be safer to fence for disabled channels
> in order to add pm runtime feature.
>
> Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com>
> ---
> drivers/hwmon/ina3221.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/hwmon/ina3221.c b/drivers/hwmon/ina3221.c
> index d61688f04594..3e98b59108ee 100644
> --- a/drivers/hwmon/ina3221.c
> +++ b/drivers/hwmon/ina3221.c
> @@ -200,6 +200,8 @@ static int ina3221_read_curr(struct device *dev, u32 attr,
> return 0;
> case hwmon_curr_crit_alarm:
> case hwmon_curr_max_alarm:
> + if (!ina3221_is_enabled(ina, channel))
> + return -ENODATA;

Makes sense, but can you check what the sensors command does with this ?
If it bails out I'd rather have the code return 0 and no error (after all,
the sensor is disabled, so any alarm would be bogus).

Thanks,
Guenter

> ret = regmap_field_read(ina->fields[reg], &regval);
> if (ret)
> return ret;
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2018-10-17 21:47    [W:0.426 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site