lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 21/22] ARM: dts: at91: at91sam9x5: switch to new clock bindings
Date
Switch at91sam9x5 boards to the new PMC clock bindings.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
---
arch/arm/boot/dts/at91sam9g15.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25.dtsi | 4 +
arch/arm/boot/dts/at91sam9g25ek.dts | 4 +-
arch/arm/boot/dts/at91sam9g35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x25.dtsi | 4 +
arch/arm/boot/dts/at91sam9x35.dtsi | 4 +
arch/arm/boot/dts/at91sam9x5.dtsi | 326 +++--------------------
arch/arm/boot/dts/at91sam9x5_can.dtsi | 18 +-
arch/arm/boot/dts/at91sam9x5_isi.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_lcd.dtsi | 19 +-
arch/arm/boot/dts/at91sam9x5_macb0.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_macb1.dtsi | 11 +-
arch/arm/boot/dts/at91sam9x5_usart3.dtsi | 11 +-
13 files changed, 62 insertions(+), 369 deletions(-)

diff --git a/arch/arm/boot/dts/at91sam9g15.dtsi b/arch/arm/boot/dts/at91sam9g15.dtsi
index 27de7dc0f0e0..b34a6c65bd44 100644
--- a/arch/arm/boot/dts/at91sam9g15.dtsi
+++ b/arch/arm/boot/dts/at91sam9g15.dtsi
@@ -24,6 +24,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g15-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25.dtsi b/arch/arm/boot/dts/at91sam9g25.dtsi
index 0898213f3bb2..d8bb56253e64 100644
--- a/arch/arm/boot/dts/at91sam9g25.dtsi
+++ b/arch/arm/boot/dts/at91sam9g25.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts
index 31fecc2cdaf9..ac730812a81d 100644
--- a/arch/arm/boot/dts/at91sam9g25ek.dts
+++ b/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -32,9 +32,9 @@
pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioA 7 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioA 13 GPIO_ACTIVE_HIGH>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "xvclk";
- assigned-clocks = <&pck0>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 8>;
assigned-clock-rates = <25000000>;
status = "okay";

diff --git a/arch/arm/boot/dts/at91sam9g35.dtsi b/arch/arm/boot/dts/at91sam9g35.dtsi
index ff4115886f97..333e158feb61 100644
--- a/arch/arm/boot/dts/at91sam9g35.dtsi
+++ b/arch/arm/boot/dts/at91sam9g35.dtsi
@@ -25,6 +25,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9g35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x25.dtsi b/arch/arm/boot/dts/at91sam9x25.dtsi
index 3c5fa3388997..a99703a262c9 100644
--- a/arch/arm/boot/dts/at91sam9x25.dtsi
+++ b/arch/arm/boot/dts/at91sam9x25.dtsi
@@ -27,6 +27,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9x25-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x35.dtsi b/arch/arm/boot/dts/at91sam9x35.dtsi
index d9054e8167b7..bca274d33f68 100644
--- a/arch/arm/boot/dts/at91sam9x35.dtsi
+++ b/arch/arm/boot/dts/at91sam9x35.dtsi
@@ -26,6 +26,10 @@
0x003fffff 0x003f8000 0x00000000 /* pioD */
>;
};
+
+ pmc: pmc@fffffc00 {
+ compatible = "atmel,at91sam9x35-pmc", "atmel,at91sam9x5-pmc", "syscon";
+ };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 11c0ef102ab1..07443a387a8f 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -111,7 +111,7 @@
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};

@@ -124,269 +124,9 @@
compatible = "atmel,at91sam9x5-pmc", "syscon";
reg = <0xfffffc00 0x200>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc>, <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <745000000 800000000 0 0
- 695000000 750000000 1 0
- 645000000 700000000 2 0
- 595000000 650000000 3 0
- 545000000 600000000 0 1
- 495000000 555000000 1 1
- 445000000 500000000 2 1
- 400000000 450000000 3 1>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 133333333>;
- atmel,clk-divisors = <1 2 4 3>;
- atmel,master-clk-have-div3-pres;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
- };
-
- smd: smdclk {
- compatible = "atmel,at91sam9x5-clk-smd";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- smdck: smdck {
- #clock-cells = <0>;
- reg = <4>;
- clocks = <&smd>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioAB_clk: pioAB_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioCD_clk: pioCD_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- smd_clk: smd_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- twi0_clk: twi0_clk {
- reg = <9>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- twi2_clk: twi2_clk {
- #clock-cells = <0>;
- reg = <11>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- dma1_clk: dma1_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};

reset_controller: rstc@fffffe00 {
@@ -405,7 +145,7 @@
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};

sckc@fffffe50 {
@@ -438,7 +178,7 @@
#size-cells = <0>;
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};

@@ -448,7 +188,7 @@
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};

@@ -457,7 +197,7 @@
reg = <0xffffec00 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "dma_clk";
};

@@ -466,7 +206,7 @@
reg = <0xffffee00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "dma_clk";
};

@@ -864,7 +604,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};

pioB: gpio@fffff600 {
@@ -876,7 +616,7 @@
#gpio-lines = <19>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};

pioC: gpio@fffff800 {
@@ -887,7 +627,7 @@
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};

pioD: gpio@fffffa00 {
@@ -899,7 +639,7 @@
#gpio-lines = <22>;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
};

@@ -912,7 +652,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "pclk";
status = "disabled";
};
@@ -924,7 +664,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -938,7 +678,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
pinctrl-names = "default";
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -954,7 +694,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -968,7 +708,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "usart";
status = "disabled";
};
@@ -982,7 +722,7 @@
dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
<&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -996,7 +736,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -1012,7 +752,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
status = "disabled";
};

@@ -1027,7 +767,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
status = "disabled";
};

@@ -1042,7 +782,7 @@
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
- clocks = <&twi2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
status = "disabled";
};

@@ -1052,7 +792,7 @@
interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart0>;
- clocks = <&uart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "usart";
status = "disabled";
};
@@ -1063,7 +803,7 @@
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
- clocks = <&uart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "usart";
status = "disabled";
};
@@ -1074,7 +814,7 @@
compatible = "atmel,at91sam9x5-adc";
reg = <0xf804c000 0x100>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&adc_clk>,
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>,
<&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-use-external-triggers;
@@ -1121,7 +861,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1137,7 +877,7 @@
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1149,7 +889,7 @@
reg = <0x00500000 0x80000
0xf803c000 0x400>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&utmi>, <&udphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "hclk", "pclk";
status = "disabled";

@@ -1229,7 +969,7 @@
compatible = "atmel,at91sam9rl-pwm";
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
#pwm-cells = <3>;
status = "disabled";
};
@@ -1239,7 +979,7 @@
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00600000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1248,7 +988,7 @@
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1266,7 +1006,7 @@
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";

nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9x5_can.dtsi b/arch/arm/boot/dts/at91sam9x5_can.dtsi
index 8eb2f9c1b978..125f9e3b49ad 100644
--- a/arch/arm/boot/dts/at91sam9x5_can.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_can.dtsi
@@ -13,27 +13,13 @@
/ {
ahb {
apb {
- pmc: pmc@fffffc00 {
- periphck {
- can0_clk: can0_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
- };
- };
-
can0: can@f8000000 {
compatible = "atmel,at91sam9x5-can";
reg = <0xf8000000 0x300>;
interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can0_rx_tx>;
- clocks = <&can0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "can_clk";
status = "disabled";
};
@@ -44,7 +30,7 @@
interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1_rx_tx>;
- clocks = <&can1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
clock-names = "can_clk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_isi.dtsi b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
index 8fc45ca4dcb5..c3e45b57b6a2 100644
--- a/arch/arm/boot/dts/at91sam9x5_isi.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_isi.dtsi
@@ -44,22 +44,13 @@
};
};

- pmc: pmc@fffffc00 {
- periphck {
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
- };
-
isi: isi@f8048000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xf8048000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_isi_data_0_7>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "isi_clk";
status = "disabled";
port {
diff --git a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
index 1629db9dd563..12595fb11691 100644
--- a/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_lcd.dtsi
@@ -17,7 +17,7 @@
compatible = "atmel,at91sam9x5-hlcdc";
reg = <0xf8038000 0x4000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk","sys_clk", "slow_clk";
status = "disabled";

@@ -143,23 +143,6 @@
};
};
};
-
- pmc: pmc@fffffc00 {
- periphck {
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
- };
-
- systemck {
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
- };
- };
};
};
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
index 73d7e30965ba..57c2e5a4fb53 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb0.dtsi
@@ -43,22 +43,13 @@
};
};

- pmc: pmc@fffffc00 {
- periphck {
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
- };
- };
-
macb0: ethernet@f802c000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf802c000 0x100>;
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb0_rmii>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>, <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
index d81980c40c7d..59b8da87d3c1 100644
--- a/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_macb1.dtsi
@@ -31,22 +31,13 @@
};
};

- pmc: pmc@fffffc00 {
- periphck {
- macb1_clk: macb1_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
- };
- };
-
macb1: ethernet@f8030000 {
compatible = "cdns,at91sam9260-macb", "cdns,macb";
reg = <0xf8030000 0x100>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb1_rmii>;
- clocks = <&macb1_clk>, <&macb1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_PERIPHERAL 27>;
clock-names = "hclk", "pclk";
status = "disabled";
};
diff --git a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
index a32d12b406a3..9102dfbed5d8 100644
--- a/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5_usart3.dtsi
@@ -42,15 +42,6 @@
};
};

- pmc: pmc@fffffc00 {
- periphck {
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
- };
- };
-
usart3: serial@f8028000 {
compatible = "atmel,at91sam9260-usart";
reg = <0xf8028000 0x200>;
@@ -60,7 +51,7 @@
dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
<&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
dma-names = "tx", "rx";
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
--
2.19.1
\
 
 \ /
  Last update: 2018-10-16 16:23    [W:0.134 / U:95.596 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site