lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] DT: rockchip: Fix stability issues with the 'performance' governor on rock960
On Tue, Oct 16, 2018 at 04:00:20PM +0200, Daniel Lezcano wrote:
> When the performance governor is set as default, the rock960 hangs
> around one minute after booting, whatever the activity is (idle, key
> pressed, loaded, ...).
>
> Based on the commit log found at https://patchwork.kernel.org/patch/10092377/
>
> "vdd_log has no consumer and therefore will not be set to a specific
> voltage. Still the PWM output pin gets configured and thence the vdd_log
> output voltage will changed from it's default. Depending on the idle
> state of the PWM this will slightly over or undervoltage the logic supply
> of the RK3399 and cause instability with GbE (undervoltage) and PCIe
> (overvoltage). Since the default value set by a voltage divider is the
> correct supply voltage and we don't need to change it during runtime we
> remove the rail from the devicetree completely so the PWM pin will not
> be configured."
>
> After removing the vdd-log from the rock960's specific DT, the board
> does no longer hang and shows a stable behavior.
>
> Apply the same change for the rock960 by removing the vdd-log from the
> DT.
>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Tested on Rock960 v1.2 board, hence

Tested-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks a ton!

Regards,
Mani

> ---
> arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi | 12 ------------
> 1 file changed, 12 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> index 6c8c4ab..56abbb0 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rock960.dtsi
> @@ -57,18 +57,6 @@
> regulator-always-on;
> vin-supply = <&vcc_sys>;
> };
> -
> - vdd_log: vdd-log {
> - compatible = "pwm-regulator";
> - pwms = <&pwm2 0 25000 0>;
> - regulator-name = "vdd_log";
> - regulator-min-microvolt = <800000>;
> - regulator-max-microvolt = <1400000>;
> - regulator-always-on;
> - regulator-boot-on;
> - vin-supply = <&vcc_sys>;
> - };
> -
> };
>
> &cpu_l0 {
> --
> 2.7.4
>

\
 
 \ /
  Last update: 2018-10-16 16:22    [W:0.218 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site