lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 05/14] MIPS: lantiq: Unselect SWAP_IO_SPACE when LANTIQ is selected
Date
SWAP_IO_SPACE macro prevents serial driver /drivers/tty/serial/lantiq.c
to use readl/writel to replace ltq_r32/w32 which are SoC or platform
specific APIs.

readl/writel are used for this serial driver to support multiple
platforms and multiple architectures. The legacy lantiq platform(Danube)
enables SWAP_IO_SPACE for supporting PCI due to some hardware bugs.

It's a little-endian bus plus PCI TX/RX swap enable impacted both data
and control path for MIPS based platforms. But it is better to let PCI
device driver to do endian swap since SWAP_IO_SPACE is a global wide macro
which potentially impacts other peripheral like USB.
ltq_r32/ltq_w32 is not impacted in other device drivers based on MIPS when
SWAP_IO_SPACE is not selected as they use non-byte swapping OS API
(__raw_read/__raw_writel).

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---

arch/mips/Kconfig | 1 -
1 file changed, 1 deletion(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 138d60cf19bc..dcc1fd39cbf3 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -406,7 +406,6 @@ config LANTIQ
select SYS_SUPPORTS_VPE_LOADER
select SYS_HAS_EARLY_PRINTK
select GPIOLIB
- select SWAP_IO_SPACE
select BOOT_RAW
select CLKDEV_LOOKUP
select USE_OF
--
2.11.0
\
 
 \ /
  Last update: 2018-10-16 11:22    [W:0.069 / U:2.372 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site