lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH 09/14] serial: lantiq: Add CCF support
Date
Previous implementation uses platform-dependent API to get the clock.
Those functions are not available for other SoC which uses the same IP.
The CCF (Common Clock Framework) have an abstraction based APIs for
clock. In future, the platform specific code will be removed when the
legacy soc use CCF as well.
Change to use CCF APIs to get clock and rate. So that different SoCs
can use the same driver.

Signed-off-by: Songjun Wu <songjun.wu@linux.intel.com>
---

drivers/tty/serial/lantiq.c | 12 ++++++++++--
1 file changed, 10 insertions(+), 2 deletions(-)

diff --git a/drivers/tty/serial/lantiq.c b/drivers/tty/serial/lantiq.c
index 34b1ef3c12ce..88210de00f35 100644
--- a/drivers/tty/serial/lantiq.c
+++ b/drivers/tty/serial/lantiq.c
@@ -744,14 +744,22 @@ lqasc_probe(struct platform_device *pdev)
port->irq = irqres[0].start;
port->mapbase = mmres->start;

- ltq_port->freqclk = clk_get_fpi();
+ if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK))
+ ltq_port->freqclk = clk_get_fpi();
+ else
+ ltq_port->freqclk = devm_clk_get(&pdev->dev, "freq");
+
+
if (IS_ERR(ltq_port->freqclk)) {
pr_err("failed to get fpi clk\n");
return -ENOENT;
}

/* not all asc ports have clock gates, lets ignore the return code */
- ltq_port->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ENABLED(CONFIG_LANTIQ) && !IS_ENABLED(CONFIG_COMMON_CLK))
+ ltq_port->clk = clk_get(&pdev->dev, NULL);
+ else
+ ltq_port->clk = devm_clk_get(&pdev->dev, "asc");

ltq_port->tx_irq = irqres[0].start;
ltq_port->rx_irq = irqres[1].start;
--
2.11.0
\
 
 \ /
  Last update: 2018-10-16 11:21    [W:0.063 / U:5.188 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site