lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 4.14 16/61] ARM: dts: BCM63xx: Fix incorrect interrupt specifiers
Date
From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 3ab97942d0213b6583a5408630a8cbbfbf54730f ]

A number of our interrupts were incorrectly specified, fix both the PPI
and SPI interrupts to be correct.

Fixes: b5762cacc411 ("ARM: bcm63138: add NAND DT support")
Fixes: 46d4bca0445a ("ARM: BCM63XX: add BCM63138 minimal Device Tree")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/bcm63138.dtsi | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi
index 43ee992ccdcf..6df61518776f 100644
--- a/arch/arm/boot/dts/bcm63138.dtsi
+++ b/arch/arm/boot/dts/bcm63138.dtsi
@@ -106,21 +106,23 @@
global_timer: timer@1e200 {
compatible = "arm,cortex-a9-global-timer";
reg = <0x1e200 0x20>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_EDGE_RISING>;
clocks = <&axi_clk>;
};

local_timer: local-timer@1e600 {
compatible = "arm,cortex-a9-twd-timer";
reg = <0x1e600 0x20>;
- interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_EDGE_RISING)>;
clocks = <&axi_clk>;
};

twd_watchdog: watchdog@1e620 {
compatible = "arm,cortex-a9-twd-wdt";
reg = <0x1e620 0x20>;
- interrupts = <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>;
+ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) |
+ IRQ_TYPE_LEVEL_HIGH)>;
};

armpll: armpll {
@@ -158,7 +160,7 @@
serial0: serial@600 {
compatible = "brcm,bcm6345-uart";
reg = <0x600 0x1b>;
- interrupts = <GIC_SPI 32 0>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@@ -167,7 +169,7 @@
serial1: serial@620 {
compatible = "brcm,bcm6345-uart";
reg = <0x620 0x1b>;
- interrupts = <GIC_SPI 33 0>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&periph_clk>;
clock-names = "periph";
status = "disabled";
@@ -180,7 +182,7 @@
reg = <0x2000 0x600>, <0xf0 0x10>;
reg-names = "nand", "nand-int-base";
status = "disabled";
- interrupts = <GIC_SPI 38 0>;
+ interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "nand";
};

--
2.17.1
\
 
 \ /
  Last update: 2018-10-16 06:29    [W:0.149 / U:32.960 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site