lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 11/18] of: overlay: test case of two fragments adding same node
Date
From: Frank Rowand <frank.rowand@sony.com>

Multiple overlay fragments adding or deleting the same node is not
supported. An attempt to do so results in an incorrect devicetree.
The node name will be munged for the second add.

After adding this patch, the unittest messages will show:

Duplicate name in motor-1, renamed to "controller#1"
OF: overlay: of_overlay_apply() err=0
### dt-test ### of_overlay_fdt_apply() expected -22, ret=0, overlay_bad_add_dup_node
### dt-test ### FAIL of_unittest_overlay_high_level():2419 Adding overlay 'overlay_bad_add_dup_node' failed

...

### dt-test ### end of unittest - 210 passed, 1 failed

The incorrect (munged) node name "controller#1" can be seen in the
/proc filesystem:

$ pwd
/proc/device-tree/testcase-data-2/substation@100/motor-1
$ ls
compatible controller controller#1 name phandle spin
$ ls controller
power_bus
$ ls controller#1
power_bus_emergency

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
---
drivers/of/unittest-data/Makefile | 1 +
.../of/unittest-data/overlay_bad_add_dup_node.dts | 28 ++++++++++++++++++++++
drivers/of/unittest.c | 5 ++++
3 files changed, 34 insertions(+)
create mode 100644 drivers/of/unittest-data/overlay_bad_add_dup_node.dts

diff --git a/drivers/of/unittest-data/Makefile b/drivers/of/unittest-data/Makefile
index 013d85e694c6..166dbdbfd1c5 100644
--- a/drivers/of/unittest-data/Makefile
+++ b/drivers/of/unittest-data/Makefile
@@ -17,6 +17,7 @@ obj-$(CONFIG_OF_OVERLAY) += overlay.dtb.o \
overlay_12.dtb.o \
overlay_13.dtb.o \
overlay_15.dtb.o \
+ overlay_bad_add_dup_node.dtb.o \
overlay_bad_phandle.dtb.o \
overlay_bad_symbol.dtb.o \
overlay_base.dtb.o
diff --git a/drivers/of/unittest-data/overlay_bad_add_dup_node.dts b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
new file mode 100644
index 000000000000..145dfc3b1024
--- /dev/null
+++ b/drivers/of/unittest-data/overlay_bad_add_dup_node.dts
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+/plugin/;
+
+/*
+ * &electric_1/motor-1 and &spin_ctrl_1 are the same node:
+ * /testcase-data-2/substation@100/motor-1
+ *
+ * Thus the new node "controller" in each fragment will
+ * result in an attempt to add the same node twice.
+ * This will result in an error and the overlay apply
+ * will fail.
+ */
+
+&electric_1 {
+
+ motor-1 {
+ controller {
+ power_bus = < 0x1 0x2 >;
+ };
+ };
+};
+
+&spin_ctrl_1 {
+ controller {
+ power_bus_emergency = < 0x101 0x102 >;
+ };
+};
diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c
index 722537e14848..471b8eb6e842 100644
--- a/drivers/of/unittest.c
+++ b/drivers/of/unittest.c
@@ -2147,6 +2147,7 @@ struct overlay_info {
OVERLAY_INFO_EXTERN(overlay_12);
OVERLAY_INFO_EXTERN(overlay_13);
OVERLAY_INFO_EXTERN(overlay_15);
+OVERLAY_INFO_EXTERN(overlay_bad_add_dup_node);
OVERLAY_INFO_EXTERN(overlay_bad_phandle);
OVERLAY_INFO_EXTERN(overlay_bad_symbol);

@@ -2169,6 +2170,7 @@ struct overlay_info {
OVERLAY_INFO(overlay_12, 0),
OVERLAY_INFO(overlay_13, 0),
OVERLAY_INFO(overlay_15, 0),
+ OVERLAY_INFO(overlay_bad_add_dup_node, -EINVAL),
OVERLAY_INFO(overlay_bad_phandle, -EINVAL),
OVERLAY_INFO(overlay_bad_symbol, -EINVAL),
{}
@@ -2413,6 +2415,9 @@ static __init void of_unittest_overlay_high_level(void)
unittest(overlay_data_apply("overlay", NULL),
"Adding overlay 'overlay' failed\n");

+ unittest(overlay_data_apply("overlay_bad_add_dup_node", NULL),
+ "Adding overlay 'overlay_bad_add_dup_node' failed\n");
+
unittest(overlay_data_apply("overlay_bad_phandle", NULL),
"Adding overlay 'overlay_bad_phandle' failed\n");

--
Frank Rowand <frank.rowand@sony.com>
\
 
 \ /
  Last update: 2018-10-16 04:41    [W:0.085 / U:3.936 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site