lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/7] Input: sx8654 - add reset-gpio support
From
Date
Hi Dimitry,
thanks for the quick reply!

On 10/16/18 7:39 PM, Dmitry Torokhov wrote:
> Hi Richard,
>
> On Tue, Oct 16, 2018 at 11:16:48AM +0200, Richard Leitner wrote:
>> The sx8654 features a NRST input which may be connected to a GPIO.
>> Therefore add support for hard-resetting the sx8654 via this NRST.
>>
>> If the reset-gpio property is provided the sx8654 is resetted via NRST
>> instead of the soft-reset via I2C.
>>

...

>> +
>> + dev_dbg(&ts->client->dev, "NRST unavailable, try softreset\n");
>> + err = i2c_smbus_write_byte_data(ts->client, I2C_REG_SOFTRESET,
>> + SOFTRESET_VALUE);
>> + if (err)
>> + return err;
>
> Have this in an "else" branch?

If that's the preferred way... of course.

>
>> +
>> + return 0;
>> +}
>> +
>> static int sx8654_open(struct input_dev *dev)
>> {
>> struct sx8654 *sx8654 = input_get_drvdata(dev);
>> @@ -171,6 +195,44 @@ static void sx8654_close(struct input_dev *dev)
>> }
>> }
>>
>> +#ifdef CONFIG_OF
>> +static int sx8654_get_ofdata(struct sx8654 *ts)
>> +{
>> + struct device *dev = &ts->client->dev;
>> + struct device_node *node = dev->of_node;
>> + int err;
>> +
>> + if (!node) {
>> + ts->gpio_reset = NULL;
>> + return 0;
>> + }
>
> There is no need to wrap this into CONFIG_OF or test "node". Just use
> devm_gpiod_get_optional() and it will work equally well on DT, ACPI, and
> static board systems.

Ok. Thank you for that information!
I haven't been aware of this before :-)

>
>> +
>> + ts->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
>> + if (PTR_ERR(ts->gpio_reset) == -EPROBE_DEFER) {
>> + return -EPROBE_DEFER;
>> + } else if (IS_ERR(ts->gpio_reset)) {
>> + err = PTR_ERR(ts->gpio_reset);
>
> I'd do:
>
> if (err != -EPROBE_DEFER)
> dev_err(...)
>
> here instead of separate branch.

Indeed... Looks like a more sexy solution. Thanks.

>
>> + dev_err(dev, "unable to request GPIO reset pin (%d)\n", err);
>> + return err;
>> + }
>> + dev_dbg(dev, "got GPIO reset pin\n");
>
> Also, I'd move all this code directly into probe() since all this
> #ifdefery is not needed.

Without the #ifdef'ery and node checking this sounds reasonable.

>
>> +
>> + return 0;
>> +}
>> +
>> +static const struct of_device_id sx8654_of_match[] = {
>> + { .compatible = "semtech,sx8654", },
>> + { },
>> +};
>
> Please keep the device table wehere it was.

OK.

>> @@ -186,10 +248,20 @@ static int sx8654_probe(struct i2c_client *client,
>> if (!sx8654)
>> return -ENOMEM;
>>
>> + sx8654->client = client;
>> +
>> + error = sx8654_get_ofdata(sx8654);
>> + if (error) {
>> + dev_err(&client->dev, "get_ofdata failed: %d\n", error);
>> + return error;
>> + }
>> +
>> input = devm_input_allocate_device(&client->dev);
>> if (!input)
>> return -ENOMEM;
>>
>> + sx8654->input = input;
>> +
>> input->name = "SX8654 I2C Touchscreen";
>> input->id.bustype = BUS_I2C;
>> input->dev.parent = &client->dev;
>> @@ -201,15 +273,11 @@ static int sx8654_probe(struct i2c_client *client,
>> input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
>> input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
>>
>> - sx8654->client = client;
>> - sx8654->input = input;
>> -
>
> Why do we need to move this?

This was because sx8654_get_ofdata needed ts->client->dev.
But as I will integrate the reset gpio getting in the probe function
I'll move it back.

...

>
> Thanks.
>

I'll send a v2 of the series as soon as I have fixed the other patches.

regards;Richard.L

\
 
 \ /
  Last update: 2018-10-16 21:33    [W:0.054 / U:8.240 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site