lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/7] Input: sx8654 - use common of_touchscreen functions
On Tue, Oct 16, 2018 at 11:23:10AM +0200, Richard Leitner wrote:
> of_touchscreen.c provides a common interface for a axis invertion and
> swapping of touchscreens. Therefore use it in the sx8654 driver.
>
> Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
> ---
> drivers/input/touchscreen/sx8654.c | 37 +++++++++++++++++++------------------
> 1 file changed, 19 insertions(+), 18 deletions(-)
>
> diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
> index 33f7a0be4ef8..08b064f96b4e 100644
> --- a/drivers/input/touchscreen/sx8654.c
> +++ b/drivers/input/touchscreen/sx8654.c
> @@ -36,6 +36,7 @@
> #include <linux/gpio/consumer.h>
> #include <linux/delay.h>
> #include <linux/hrtimer.h>
> +#include <linux/input/touchscreen.h>
>
> /* register addresses */
> #define I2C_REG_TOUCH0 0x00
> @@ -100,6 +101,7 @@ struct sx8654 {
> struct i2c_client *client;
> struct gpio_desc *gpio_reset;
> struct hrtimer timer;
> + struct touchscreen_properties props;
>
> const struct sx865x_data *data;
> };
> @@ -168,8 +170,7 @@ static irqreturn_t sx8650_irq(int irq, void *handle)
> chdata);
> }
>
> - input_report_abs(ts->input, ABS_X, x);
> - input_report_abs(ts->input, ABS_Y, y);
> + touchscreen_report_pos(ts->input, &ts->props, x, y, false);
> input_report_key(ts->input, BTN_TOUCH, 1);
> input_sync(ts->input);
> dev_dbg(dev, "point(%4d,%4d)\n", x, y);
> @@ -215,8 +216,8 @@ static irqreturn_t sx8654_irq(int irq, void *handle)
> x = ((data[0] & 0xf) << 8) | (data[1]);
> y = ((data[2] & 0xf) << 8) | (data[3]);
>
> - input_report_abs(sx8654->input, ABS_X, x);
> - input_report_abs(sx8654->input, ABS_Y, y);
> + touchscreen_report_pos(sx8654->input, &sx8654->props, x, y,
> + false);
> input_report_key(sx8654->input, BTN_TOUCH, 1);
> input_sync(sx8654->input);
>
> @@ -355,6 +356,8 @@ static int sx8654_get_ofdata(struct sx8654 *ts)
> }
> dev_dbg(dev, "got GPIO reset pin\n");
>

You need to mark axes used by the device before calling
touchscreen_parse_properties(), otherwise you'll get warnings if
corresponding property is present in DT.

> + touchscreen_parse_properties(ts->input, false, &ts->props);
> +
> return 0;
> }
> #else /* CONFIG_OF */
> @@ -380,25 +383,11 @@ static int sx8654_probe(struct i2c_client *client,
> sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
> if (!sx8654)
> return -ENOMEM;
> -
> sx8654->client = client;
>
> - error = sx8654_get_ofdata(sx8654);
> - if (error) {
> - dev_err(&client->dev, "get_ofdata failed: %d\n", error);
> - return error;
> - }
> -
> - if (!sx8654->data->has_irq_penrelease) {
> - dev_dbg(&client->dev, "use timer for penrelease\n");
> - hrtimer_init(&sx8654->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> - sx8654->timer.function = sx865x_penrelease_timer_handler;
> - }
> -
> input = devm_input_allocate_device(&client->dev);
> if (!input)
> return -ENOMEM;
> -
> sx8654->input = input;
>
> input->name = "SX8654 I2C Touchscreen";
> @@ -414,6 +403,18 @@ static int sx8654_probe(struct i2c_client *client,
>
> input_set_drvdata(sx8654->input, sx8654);
>
> + error = sx8654_get_ofdata(sx8654);
> + if (error) {
> + dev_err(&client->dev, "get_ofdata failed: %d\n", error);
> + return error;
> + }
> +
> + if (!sx8654->data->has_irq_penrelease) {
> + dev_dbg(&client->dev, "use timer for penrelease\n");
> + hrtimer_init(&sx8654->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
> + sx8654->timer.function = sx865x_penrelease_timer_handler;
> + }
> +
> error = sx8654_reset(sx8654);
> if (error) {
> dev_err(&client->dev, "reset failed");
> --
> 2.11.0
>

--
Dmitry

\
 
 \ /
  Last update: 2018-10-16 19:53    [W:0.078 / U:44.892 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site