lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] dt-bindings: irq: add binding for Freescale IRQSTEER multiplexer
Date
This adds the DT binding for the Freescale IRQSTEER interrupt
multiplexer found in the i.MX8 familiy SoCs.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
.../interrupt-controller/fsl,irqsteer.txt | 39 +++++++++++++++++++
1 file changed, 39 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt

diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
new file mode 100644
index 000000000000..ed2b18165591
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,irqsteer.txt
@@ -0,0 +1,39 @@
+Freescale IRQSTEER Interrupt multiplexer
+
+Required properties:
+
+- compatible: should be:
+ - "fsl,imx8m-irqsteer"
+ - "fsl,imx-irqsteer"
+- reg: Physical base address and size of registers.
+- interrupts: Should contain the parent interrupt line used to multiplex the
+ input interrupts.
+- clocks: Should contain one clock for entry in clock-names
+ see Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names:
+ - "ipg": main logic clock
+- interrupt-controller: Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. The value must be 2.
+
+Optional properties:
+- fsl,channel: Number of channels managed by this controller. Each channel
+ contains up to 32 interrupt sources. If absent defaults to 1.
+- fsl,endian:
+ 0: controller registers are little endian
+ 1: controller registers are big endian
+ If absent defaults to 0.
+
+Example:
+
+ interrupt-controller@32e2d000 {
+ compatible = "fsl,imx8m-irqsteer", "fsl,imx-irqsteer";
+ reg = <0x32e2d000 0x1000>;
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>;
+ clock-names = "ipg";
+ fsl,channel = <2>;
+ fsl,endian = <1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
--
2.19.0
\
 
 \ /
  Last update: 2018-10-16 18:43    [W:0.113 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site