lkml.org 
[lkml]   [2018]   [Oct]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 11/11] DT: arm: exynos: add support for thermal trip irq-mode
Date
This patch adds support for new flash which indicates
that trip point triggers irq when temperature is met.
Exynos5433 supports 8 trip point which will trigger irq.
Above that number other trip points should be registered
without 'irq-mode' flag.
That will force the thermal framework to start polling
the temperature sensor under configured conditions and
handle the trip point.

Cc: Kukjin Kim <kgene@kernel.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: devicetree@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Lukasz Luba <l.luba@partner.samsung.com>
---
arch/arm/boot/dts/exynos5410-odroidxu.dts | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5410-odroidxu.dts b/arch/arm/boot/dts/exynos5410-odroidxu.dts
index a2046f5..c255466 100644
--- a/arch/arm/boot/dts/exynos5410-odroidxu.dts
+++ b/arch/arm/boot/dts/exynos5410-odroidxu.dts
@@ -121,22 +121,26 @@
cpu_alert0: cpu-alert-0 {
temperature = <50000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu_alert1: cpu-alert-1 {
temperature = <60000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu_alert2: cpu-alert-2 {
temperature = <70000>; /* millicelsius */
hysteresis = <5000>; /* millicelsius */
- type = "active";
+ type = "passive";
+ irq-mode;
};
cpu_crit0: cpu-crit-0 {
temperature = <120000>; /* millicelsius */
hysteresis = <0>; /* millicelsius */
type = "critical";
+ irq-mode;
};
};

--
2.7.4
\
 
 \ /
  Last update: 2018-10-16 16:58    [W:0.032 / U:31.020 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site