lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] dt-bindings: phy: Document cadence Sierra PHY bindings
On Wed, Oct 03, 2018 at 05:02:25PM +0100, Alan Douglas wrote:
> Add DT binding documentation for Sierra PHY. The PHY supports
> a number of different protocols, including PCIe and USB.
>
> The PHY lanes may be configured as single or multi-lane links.
> Each link is treated as a separate sub-node. For example, if
> there are 4 lanes in total the first 2 might be configured as
> a multi-lane PCIe link while the other two are single lane
> USB links, and in this case there would be 3 sub-nodes.
>
> There are two resets for the PHY block (one for APB register
> access, one for the PHY link) and separate resets for each
> link. For multi-lane links, the reset corresponds to the
> reset line on the master lane, the resets on other lanes
> have no effect.
>
> Signed-off-by: Alan Douglas <adouglas@cadence.com>
> ---
> .../devicetree/bindings/phy/cdns-sierra-phy.txt | 68 ++++++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
>
> diff --git a/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
> new file mode 100644
> index 0000000..0e2f3e3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/cdns-sierra-phy.txt
> @@ -0,0 +1,68 @@
> +Cadence Sierra PHY
> +-----------------------
> +
> +Required properties:
> +- compatible: cdns,sierra-phy-t0
> +- clocks: Must contain an entry in clock-names.
> + See ../clocks/clock-bindings.txt for details.
> +- clock-names: Must be "phy_clk"
> +- resets: Must contain an entry for each in reset-names.
> + See ../reset/reset.txt for details.
> +- reset-names: Must include "sierra_reset" and "sierra_apb" and one for each
> + sub-node.
> + "sierra_reset" must control the reset line to the PHY.
> + "sierra_apb" must control the reset line to the APB PHY
> + interface.
> + The name of the reset for each sub-node should match the full
> + name of the sub-node. The sub-node resets must control the
> + reset line for the master lane of the sub-node.

Add a resets property to the sub-nodes instead.

> +- reg: register range for the PHY.
> +- #address-cells: Must be 1
> +- #size-cells: Must be 0
> +
> +Optional properties:
> +- cdns,autoconf: A boolean property whose presence indicates that the
> + PHY registers will be configured by hardware. If not
> + present, all sub-node optional properties must be
> + provided.
> +
> +Sub-nodes:
> + Each group of PHY lanes with a single master lane should be represented as
> + a sub-node. Note that the actual configuration of each lane is determined by
> + hardware strapping, and must match the configuration specified here.
> +
> +Sub-node required properties:
> +- #phy-cells: Generic PHY binding; must be 0.
> +
> +Sub-node optional properties:
> +- reg: The master lane number. This is the lowest numbered
> + lane in the lane group.

How do you name the nodes if this is optional?

> +- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The
> + group is made up of consecutive lanes.
> +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on
> + configuration of lanes.
> +
> +Example:
> + pcie_phy4: pcie-phy@fd240000 {
> + compatible = "cdns,sierra-phy-t0";
> + reg = <0x0 0xfd240000 0x0 0x40000>;
> + resets = <&phyrst 0>, <&phyrst 1>, <&phyrst 2>, <&phyrst 4>;
> + reset-names = "sierra_reset", "sierra_apb",
> + "pcie_phy@0", "pcie_phy@2";
> + clocks = <&phyclock>;
> + clock-names = "phy_clk";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pcie0_phy0: pcie-phy@0 {
> + reg = <0>;
> + cdns,num-lanes = <2>;
> + #phy-cells = <0>;
> + cdns,phy-type = <PHY_TYPE_PCIE>;
> + };
> + pcie0_phy1: pcie-phy@2 {
> + reg = <2>;
> + cdns,num-lanes = <1>;
> + #phy-cells = <0>;
> + cdns,phy-type = <PHY_TYPE_PCIE>;
> + };
> +
> --
> 1.9.0
>

\
 
 \ /
  Last update: 2018-10-15 21:10    [W:0.058 / U:0.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site