lkml.org 
[lkml]   [2018]   [Oct]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 0/7] spi: add support for octal mode
Hi Yogesh,

On Mon, 15 Oct 2018 11:47:55 +0000
Yogesh Narayan Gaur <yogeshnarayan.gaur@nxp.com> wrote:

> Add support for octal mode IO data transfer.
> Micron flash, mt35xu512aba, supports octal mode data transfer and
> NXP FlexSPI controller supports 8 data lines for data transfer (Rx/Tx).
>
> Patch series
> * Add support for octal mode flags and parsing of same in spi driver.
> * Add opcodes for octal I/O commands in spi-nor framework, Read and Write proto for (1-1-8/1-8-8) mode.
> Opcodes are added as per octal data IO commands required for mt35xu512aba [1] flash.
> * Add parsing logic for spi-mem framework and m25p80.c device file.
> * Add mode bit required for octal mode in nxp-fspi driver [2].
> * Define binding property 'spi-rx/tx-bus-width' for LX2160ARDB target [2].
>
> Cherry pick below 2 patches (from: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git):
> c639f871febe6667d9afce28108c634e5636c735 spi: spi-mem: Fix inverted logic in op sanity check
> db122eb8a749a1eff038f9a282c620ab16c4be1d spi: spi-mem: Add extra sanity checks on the op param
>
> Tested on LX2160ARDB target with nxp-fspi driver, below are
> Read performance number of 1-1-1 and 1-1-8 read protocol.
>
> root@lxxx:~# cat /proc/mtd
> dev: size erasesize name
> mtd0: 04000000 00001000 "spi0.0"
> mtd1: 04000000 00001000 "spi0.1"
> root@lxxx:~# time mtd_debug read /dev/mtd0 0x0 0x1000000 0read
> Copied 16777216 bytes from address 0x00000000 in flash to 0read
>
> real 0m2.792s
> user 0m0.000s
> sys 0m2.790s
> root@lxxx:~# time mtd_debug read /dev/mtd1 0x0 0x1000000 0read
> Copied 16777216 bytes from address 0x00000000 in flash to 0read
>
> real 0m0.441s
> user 0m0.000s
> sys 0m0.440s
> root@ls1012ardb:~#
>
> Flash device MTD0 configured in 1-1-1 protocol.
> Flash device MTD1 configured in 1-1-8 protocol.
>
> [1] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=70384
> [2] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=70210
>
> Yogesh Gaur (7):
> spi: add support for octal I/O data transfer
> mtd: spi-nor: add opcodes for octal Read/Write commands
> mtd: spi-nor: add octal read flag for flash mt35xu512aba
> mtd: m25p80: add support of octal I/O transfer
> spi: spi-mem: add support for octal I/O data transfer

Patch 5 should be moved before patch 4 (ideally in 2nd position) if
you want this series to be bisectable.

Regards,

Boris

> spi: nxp-fspi: add mode flag bit for octal support
> arm64: dts: lx2160a: update fspi node
>
> Changes for v2:
> Incorporated review comments of Boris and Vignesh.
>
> arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++
> drivers/mtd/devices/m25p80.c | 9 ++++++++-
> drivers/mtd/spi-nor/spi-nor.c | 15 ++++++++++++++-
> drivers/spi/spi-mem.c | 9 ++++++++-
> drivers/spi/spi-nxp-fspi.c | 4 ++--
> drivers/spi/spi.c | 6 ++++++
> include/linux/mtd/spi-nor.h | 8 ++++++++
> include/linux/spi/spi.h | 2 ++
> 8 files changed, 52 insertions(+), 5 deletions(-)
>

\
 
 \ /
  Last update: 2018-10-15 13:55    [W:0.057 / U:0.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site