lkml.org 
[lkml]   [2018]   [Oct]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] thermal: rcar_thermal: Prevent doing work after unbind
Date
When testing bind/unbind on r8a7791/koelsch:

WARNING: CPU: 1 PID: 697 at lib/debugobjects.c:329 debug_print_object+0x8c/0xb4
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x10

This happens if the workqueue runs after the device has been unbound.
Fix this by cancelling any queued work during remove.

Fixes: e0a5172e9eec7f0d ("thermal: rcar: add interrupt support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
v2:
- Add Reviewed-by.
---
drivers/thermal/rcar_thermal.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/thermal/rcar_thermal.c b/drivers/thermal/rcar_thermal.c
index ea132e122b174757..616ba2fccf410d3b 100644
--- a/drivers/thermal/rcar_thermal.c
+++ b/drivers/thermal/rcar_thermal.c
@@ -453,6 +453,7 @@ static int rcar_thermal_remove(struct platform_device *pdev)

rcar_thermal_for_each_priv(priv, common) {
rcar_thermal_irq_disable(priv);
+ cancel_delayed_work_sync(&priv->work);
if (priv->chip->use_of_thermal)
thermal_remove_hwmon_sysfs(priv->zone);
else
--
2.17.1
\
 
 \ /
  Last update: 2018-10-12 12:26    [W:0.030 / U:1.724 seconds]
©2003-2018 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site